+1 on the DMZ feature. I found a manual for the HGB10R-02, and there is a DMZ
feature under Advanced Setup > NAT > DMZ Host.  I hope that works for you.

73,
Lee K5DAT

On Wed, Sep 28, 2022 at 6:30 PM Marius Petrescu via 44net <44net@mailman.ampr.org> wrote:
Hi Libor,

You can try to use the DMZ feature if available. Normally, that will
fully forward any traffic, including proto-4.

Marius, YO2LOJ

On 28/09/2022 22:07, Libor Berka via 44net wrote:
> Hello
> I started to have that problem to receive no response from
> 169.228.34.84 using
> ampr-ripd program. I had en old net modem changed  by my provider
> for HGB10R-021 modem to have more internet speed and really
> there is not possible to configure protocol-4, only TCP USB or BOTH.
> So I am already more weeks without axip links.
> I have no idea how to resolve this problem.
> 73 Libor, sysop of OK2PEN-5 amprnet gate IP 44.63.16.113.
>
>
> _______________________________________________
> 44net mailing list -- 44net@mailman.ampr.org
> To unsubscribe send an email to 44net-leave@mailman.ampr.org
_______________________________________________
44net mailing list -- 44net@mailman.ampr.org
To unsubscribe send an email to 44net-leave@mailman.ampr.org