Hi Dave,
Hi Jean,
Are you running this project on linux? http://www.yo2loj.ro/hamprojects/. Presumably so.
Yes I do,
Using tcpdump you should see routes being pushed to you pretty quickly. It takes around an hour for the ampr gateway to learn about your node and start passing your traffic.
Yes I see all the routes coming to me no problem mostly junk.
13:31:04.789280 IP 45.142.193.140.42894 >
bpq.ve2pkt.ampr.org.49856: Flags [S], seq 333420104, win 1024,
length 0
13:31:05.492126 IP 103.167.90.113.53540 >
linux.ve2pkt.ampr.org.3301: Flags [S], seq 232027413, win 1024,
length 0
13:31:05.549392 unknown ip 0
but when I try to connect a station, nothing is happening, just time out.
root@ve2pkt:/usr/local/sbin# ping ve3mch.ampr.org
PING port.ve3mch.ampr.org (44.135.85.30) 56(84) bytes of data.
From linux.ve2pkt.ampr.org (44.135.49.2) icmp_seq=1 Destination
Host Unreachable
From linux.ve2pkt.ampr.org (44.135.49.2) icmp_seq=5 Destination
Host Unreachable
Also, the ampr-ripd daemon will write occasionally to yo2loj which you can look up here: http://yo2loj.ampr.org/. What do you have your call_home configured to? You can see these with tcpdump, also.
Not sure I understand the question, but my call is VE2PKT.
I can't recall why now but I ended up using yo2loj's amprd rather than his ampr-ripd. Actually I've stopped using both and switched over to the beta wireguard 44net tunnel.
might switch to amprd, will keep poking around for a little while, and will do some reading on amprd, hard to find good examples.
Thanks for your replie.
73 de Jean
VA2OM / VE2PKT
Dave
On Fri, Feb 7, 2025 at 8:16 AM Jean VE2PKT via 44net <44net@mailman.ampr.org> wrote:
Hi,
Anyone here using ampr-ripd willing to give me some advise?
I have mine running and (Finally) learning router, but cannot connect to
any stations.
I suspect a route problem.
73 de Jean
VA2OM / VE2PKT
_______________________________________________
44net mailing list -- 44net@mailman.ampr.org
To unsubscribe send an email to 44net-leave@mailman.ampr.org
--