Hello Harold,

The ampr-ripd traffic does go over port 520 but within the IPIP tunnel itself (IP protocol 4).  To receive ampr-ripd traffic, you must have a DNS entry assigned to one of your AMPR IPs. FInally, have you been able to confirm if your ISP allows/forwards IP protocol 4 (IPIP)?

--David
KI6ZHD




On 09/27/2022 02:02 PM, Harold via 44net wrote:
Hey gang.  Kinda new here for Ive been dabbling with this for a few years though.  I have been trying to use the ampr-ripd daemon without any luck and have come to the conclusion that my ISP blocks port 520 which I believe is the port used.

With that said, i have also come to the conclusion that at this time, the encap.txt file is still accessible via ftp from the portal.ampr.org.
Is "wget ftp://USER:PASSWORD@portal.ampr.org/encap.txt" a valid ftp solution and if so where is the USER:PASSWORD derived from?
Is it our user:password into the portal?

Thanks all

Harold K7ILO
_______________________________________________
44net mailing list -- 44net@mailman.ampr.org
To unsubscribe send an email to 44net-leave@mailman.ampr.org