Here's what I see.
I watch the trace screen usually on a regular basis and the following is what happens....


When I ping your addresses I see the encap to you using 98.252.61.22 but I do not see your end encaping back to me.

Are you sure your end is actually encaping back?

I can ping 98.252.61.22 however and do see the return which is un encaped as it should be.

73, Don - ve3zda

On Wed, Jan 16, 2013 at 5:03 PM, <lleachii@aol.com> wrote:
(Please trim inclusions from previous messages)
_______________________________________________
All,

I'm experiencing a technical issue that began when my dynamic WAN address obtained a new lease. I am no longer able to communicate with other 44 subnets after my WAN obtained a new IP address. My gateway is saved in the Portal with a dynamic domain name, and the IP is correctly displayed on the portal.ampr.org website. In addition, I have also updated my IP under the rip44d -a parameter.

I am still able to receive the RIP44 announcements from 44.0.0.1 and communicate with the Internet via the tunnel thru AMPRGW; but I am no longer able to reach other AMPR networks. My WAN IP changed on 11JAN2013.

Please feel free to perform any of the following, or let me know if I am reachable via AMPR:

Ping/traceroute Router 44.60.44.1
Ping and DNS 44.60.44.3
Ping and HTTP at 44.60.44.10, 44.60.44.11 and 44.60.44.12


Regards,


Lynwood
KB3VWG
44.60.44.0/24


_________________________________________
44Net mailing list
44Net@hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
http://www.ampr.org/donate.html