I am trying to setup IPIP tunnel following instructions on wiki and can't move beyond "waiting for RIPv2 broadcasts". When I run tcpdump, I do have something.

tcpdump -nni eth0 proto 4

tcpdump: verbose output suppressed, use -v[v]... for full protocol decode

18:15:00.559893 IP 169.228.34.84 > 23.94.*.*(my gateway ip): IP 44.0.0.1.520 > 224.0.0.9.520: RIPv2, Response, length: 504

18:15:39.222805 IP 79.190.68.116 > 23.94.*.*(my gateway ip): IP 0.0.0.0.5678 > 255.255.255.255.5678: UDP, length 103

So, it looks like I am getting some RIPv2 broadcast, but it doesn't seem like ampr-ripd is processing these broadcasts?

Any help would be appricated.

Thanks

Kun Lin