The scripts used on the edgerouter which are installed by the ampr-ripd package make use of that specific 'tun44' name to define routes and rules.

So, unless you change all the references in the scripts and wizard to tun0, I would really recommend to follow the instructions as described in the wiki and keep the name tun44 for it.
Not doing it correctly will give you a non-working system.

Marius, YO2LOJ

I'm trying to use the instructions at https://wiki.ampr.org/wiki/Setting_up_a_gateway_on_Ubiquiti_EdgeRouter and I thought everything was working but I'm having and issues.

eth0 is my internet at 50.93.51.24

eth1 is my 192.168.1.x network

eth2 is my 44.135.148.129

switch0 is 192.168.1.1/24

tun44 was setup using the instructions (used 44 instead of 0)

I added the protocols (changed next-hop to tun44)

Added all the firewall modifications (keeping table 1)

I have setup in the portal my gateway at 50.93.51.24 (Did this yesterday).

My linux box has two network cards.  One on 192.168.1.110 and the other is set to 44.135.148.130/27.

My problem is I can't ping from the outside world to my linux box on the 44 network.  On my linux box when I try and ping any 44 network (like 44.60.44.10) none of the packets make it through.  I tried pinging 44.60.44.10 from the Edgerouter command line and it won't make it either.  I'm sure I missed something but I don't know what it might be.  Any help would be appreciated.

Stephen Atkins

VE6CPU/VE6STA/VE6SU

Sent with Proton Mail secure email.

_______________________________________________
44net mailing list -- 44net@mailman.ampr.org
To unsubscribe send an email to 44net-leave@mailman.ampr.org