Jesse,

Take a look at my startup script at

http://44.60.44.13/startampr

It seems you have a similar setup, although one line of your configuration seems incorrect:

ip route add 44/8 via 169.228.66.251 dev tunl0 onlink src 44.64.192.253

You should remove this route, it's invalid inside AMPR. You should not reach 44.0.0.0/8 via AMPRGW (169.228.66.251), you should reach each subnet via its gateway WAN IP address, as populated by rip44d. The return packet would come in the same manner, via their 44GW that has a route configured for you.

My router:
@kb3vwg-001:~# ip route get 44.64.192.253

44.64.192.253 via 24.229.88.252 dev tunl0 src 172.31.255.254

My route table shows:

44.64.192.0/24 via 24.229.88.252 dev tunl0 onlink window 840

73,

Lynwood
KB3VWG