About a month ago (maybe slightly more now) my gateway stopped working correctly. It had been running without issues for about a year.
I'm using a Ubiquity erX running ampr-ripd, using Marius's directions on the wiki. (BTW, ampr.org looks to have a php issue at present)
The erX was connected directly to my modem. Since then I have rebuilt the setup a few times after it stopped working correctly. Currently I have two erX's setup. Modem -> erX (DNAT protocol 4 to LAN IP) -> AMPR erX running ampr-ripd. This way I can mess with the AMPR settings without annoying the rest of the household!
On the AMPR erX I have 729 routes showing.
44.68.180.14/32 is my tunnel IP
44.68.180.1/28 is erX eth port
traceroutes to these two seem to work correctly.
traceroute to 44.68.180.1 (44.68.180.1), 30 hops max, 60 byte packets
1 gw.k1ymi.ampr.org (44.68.180.1) 159.637 ms
But to 44.68.180.2 & 3 (linux box & JNOS)
I have '-a 44.0.0.1/8' in the ampr-ripd shell script. I have also tried adding my /28 in there too.
If I have my subnet in the ampr-ripd config the traceroutes try and go through n2nov's gw in a loop.
Public traceroute
<snip>
13.|-- 132.239.255.50 0.0% 4 145.4 145.4 145.3 145.6 0.1
14.|-- ??? 100.0 4 0.0 0.0 0.0 0.0 0.0
15.|-- 44.68.180.1 0.0% 4 235.1 243.3 235.1 261.6 12.3
16.|-- 162.247.76.189 75.0% 4 190.9 190.9 190.9 190.9 0.0
17.|-- 44.68.180.1 75.0% 4 275.8 275.8 275.8 275.8 0.0
18.|-- 162.247.76.189 0.0% 4 228.6 227.1 224.1 229.6 2.5
19.|-- 44.68.180.1 75.0% 4 324.7 324.7 324.7 324.7 0.0
20.|-- 162.247.76.189 75.0% 4 273.7 273.7 273.7 273.7 0.0
21.|-- 44.68.180.1 75.0% 4 341.9 341.9 341.9 341.9 0.0
22.|-- 162.247.76.189 75.0% 4 298.0 298.0 298.0 298.0 0.0
23.|-- 44.68.180.1 75.0% 4 391.8 391.8 391.8 391.8 0.0
24.|-- 162.247.76.189 75.0% 4 338.0 338.0 338.0 338.0 0.0
25.|-- 44.68.180.1 75.0% 4 449.6 449.6 449.6 449.6 0.0
26.|-- 162.247.76.189 75.0% 4 380.3 380.3 380.3 380.3 0.0
27.|-- 44.68.180.1 75.0% 4 480.6 480.6 480.6 480.6 0.0
28.|-- 162.247.76.189 75.0% 4 455.0 455.0 455.0 455.0 0.0
29.|-- ??? 100.0 4 0.0 0.0 0.0 0.0 0.0
from yo2tm's nettools page
traceroute to 44.68.180.3 (44.68.180.3), 30 hops max, 60 byte packets
1 tun.k1ymi.ampr.org (44.68.180.14) 160.011 ms
2 *
3 tun.k1ymi.ampr.org (44.68.180.14) 209.015 ms
4 *
5 tun.k1ymi.ampr.org (44.68.180.14) 245.680 ms
6 *
7 tun.k1ymi.ampr.org (44.68.180.14) 290.880 ms
8 *
9 tun.k1ymi.ampr.org (44.68.180.14) 331.616 ms
10 *
11 tun.k1ymi.ampr.org (44.68.180.14) 355.260 ms
12 *
13 *
14 *
15 *
16 *
17 *
18 *
19 *
20 *
21 *
22 *
23 tun.k1ymi.ampr.org (44.68.180.14) 565.771 ms
24 *
25 tun.k1ymi.ampr.org (44.68.180.14) 629.763 ms
26 *
27 tun.k1ymi.ampr.org (44.68.180.14) 661.471 ms
28 *
29 *
30 *
If I remove my subnet the traceroute goes nowhere.
Does anyone have a suggestion as to what I am missing ??
73 Andrew, K1YMI