I been trying to get jnos and ubuntu 12.04 LTS to work for a week now and no joy at it.
tun0 will not loaded from jnos at all. only way I found it does is to start jnos as sudo

sudo ./jnos that loads the tun0 sometimes but then another stuff don't work and crashes
shortly after. some say to get both to work  you need to load the tun0 before jnos.
never tried it yet but have a coupe of files createtun0.c that you compile into a binary and run it
that will load the tun0 with what name you give it. going to try that. a friend of mine did it and seem
to be working good for him.  but if there is a solution to jnos and ubuntu 12.04 I should would love
to hear about it.
 
73 Russ WL7LP
From: Daniel Curry <daniel@danielcurry.net>
To: 44net@hamradio.ucsd.edu
Sent: Saturday, July 21, 2012 7:51 AM
Subject: [44net] jnos and ubuntu 12.04

(Please trim inclusions from previous messages)
_______________________________________________
  I am hearing from local hams that jnos and ubuntu 12.04 LTS are not
compatible?
Reasons:

1) unable to telnet tun0 port to the jnos application from the linux host
2) Something about module for tun not getting loaded
3) Response time from the radio side is slow on connections.

  Can someone shed some light if there is a compatibility issue and what
are the hoops that must be configured, if any?


--
Daniel Curry
PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92

San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]



_________________________________________
44Net mailing list
44Net@hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net