Awesome I did not see any documentation to that extent or config options for it in the portal.  Can you please point me in the right direction.

Scott

From: Rob PE1CHL via 44net <44net@mailman.ampr.org>
Date: Wednesday, November 30, 2022 at 4:56 AM
To: 44net@mailman.ampr.org <44net@mailman.ampr.org>
Subject: [44net] Re: 4 in 6 tunnel support

We do offer that on our gateway.  There is only one user (were 3 before), but still...
I agree that there is some use case for it, e.g. with provider routers that have trouble with GRE over NAT.

Rob

On 11/29/22 20:56, Scott Gillins via 44net wrote:

I was wondering if you had considered looking at a 4 in 6 tunnel support.  I know that it may seem backwards with a lot of things moving to native v6 but the 44 net is a great resource for hams.  One example of why I can see needing this is a lot of providers, specifically wireless, are doing a double or triple NAT of their own ipv4 address space.  While this is OK for most internet activities it is not good to support inbound connections.  You do however get a native IPV6 address that is not nated and fully routable. Having a headend location to support a 4 in 6 tunnel would help a lot of folks.  I do support large networks as part of my day job and would be willing to help set up and support if you wanted to take this on.

Thanks,

Scott