Awesome, please send me the script. Ill have time tear into it this weekend.

As for hardware, I'll bet testing on a 2800 series with 1gb of ram.

Jason R Begley jayray@digitalgoat.com wrote:

(Please trim inclusions from previous messages) _______________________________________________ With regard to using Cisco routers for integration into the AMPRNET, if

you are going to load full tunnels be ready to throw some descent hardware at the task. The first issue is the config length, you need config compression on and no less than a 2600 due to nvram size. The other issue is number of interfaces, you also need at least a 2600 to configure the number of tunnels needed to be fully meshed. I am currently running a 2651xm and it does an ok job. Let me know if you are interested in a script to convert the encap.txt into a loadable config. 73, Jason KY9J _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html

-- Bryan Fields 727-409-1194 http://bryanfields.net