In one of my last posts, I mentioned about connecting to the AMPRnet via DMVPN or PPTP which seemed to tangent into a hardware/software discussion. I sat quietly and enjoyed the many perspectives that many had to share.
I have been connecting via a combination of Linux and DMVPN for the last two weeks and it has worked as expected. A few even used the PPTP service I have setup and had good results.
I want to get some services deployed to see how flexible this setup is and if there are any issues before I attempt to extend my network using 2 ghz and 5 ghz links across the valley.
Right now I have a videoconference station setup on 44.64.192.2 which anyone is welcome to connect to.
Thanks Jesse - WC3XS
Sent from my iPhone
video conference? what protocol/portnum? how does one connect?
Eric AF6EP
On Tue, Jul 9, 2013 at 11:25 AM, Jesse Hindmarsh jesse@hindmarsh.cc wrote:
(Please trim inclusions from previous messages) _______________________________________________ In one of my last posts, I mentioned about connecting to the AMPRnet via DMVPN or PPTP which seemed to tangent into a hardware/software discussion. I sat quietly and enjoyed the many perspectives that many had to share.
I have been connecting via a combination of Linux and DMVPN for the last two weeks and it has worked as expected. A few even used the PPTP service I have setup and had good results.
I want to get some services deployed to see how flexible this setup is and if there are any issues before I attempt to extend my network using 2 ghz and 5 ghz links across the valley.
Right now I have a videoconference station setup on 44.64.192.2 which anyone is welcome to connect to.
Thanks Jesse - WC3XS
Sent from my iPhone _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html
video conference? what protocol/portnum? how does one connect?
H323 or sip. Standard ports. Just dial via IP address.
On Tue, Jul 9, 2013 at 11:25 AM, Jesse Hindmarsh jesse@hindmarsh.cc wrote:
(Please trim inclusions from previous messages) _______________________________________________ In one of my last posts, I mentioned about connecting to the AMPRnet via DMVPN or PPTP which seemed to tangent into a hardware/software discussion. I sat quietly and enjoyed the many perspectives that many had to share.
I have been connecting via a combination of Linux and DMVPN for the last two weeks and it has worked as expected. A few even used the PPTP service I have setup and had good results.
I want to get some services deployed to see how flexible this setup is and if there are any issues before I attempt to extend my network using 2 ghz and 5 ghz links across the valley.
Right now I have a videoconference station setup on 44.64.192.2 which anyone is welcome to connect to.
Thanks Jesse - WC3XS
Sent from my iPhone _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html
It switches to (https) encrypted so that is a problem over amateur radio.
73,
Bob VE3TOK
On 13-07-09 02:25 PM, Jesse Hindmarsh wrote:
(Please trim inclusions from previous messages) _______________________________________________ In one of my last posts, I mentioned about connecting to the AMPRnet via DMVPN or PPTP which seemed to tangent into a hardware/software discussion. I sat quietly and enjoyed the many perspectives that many had to share.
I have been connecting via a combination of Linux and DMVPN for the last two weeks and it has worked as expected. A few even used the PPTP service I have setup and had good results.
I want to get some services deployed to see how flexible this setup is and if there are any issues before I attempt to extend my network using 2 ghz and 5 ghz links across the valley.
Right now I have a videoconference station setup on 44.64.192.2 which anyone is welcome to connect to.
Thanks Jesse - WC3XS
Sent from my iPhone _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html
It switches to (https) encrypted so that is a problem over amateur radio.
You are correct on that one. Try a h323 or sip client. The https is only for administration. I will try to disable https so I don't break any rules.
On 13-07-09 02:25 PM, Jesse Hindmarsh wrote:
(Please trim inclusions from previous messages) _______________________________________________ In one of my last posts, I mentioned about connecting to the AMPRnet via DMVPN or PPTP which seemed to tangent into a hardware/software discussion. I sat quietly and enjoyed the many perspectives that many had to share.
I have been connecting via a combination of Linux and DMVPN for the last two weeks and it has worked as expected. A few even used the PPTP service I have setup and had good results.
I want to get some services deployed to see how flexible this setup is and if there are any issues before I attempt to extend my network using 2 ghz and 5 ghz links across the valley.
Right now I have a videoconference station setup on 44.64.192.2 which anyone is welcome to connect to.
Thanks Jesse - WC3XS
Sent from my iPhone _________________________________________ 44Net mailing list 44Net@hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html
-
Bob Tenty -
Eric Fort -
Jesse Hindmarsh