44net January 2018

44net@mailman.ampr.org

9 participants
6 discussions

Mikrotik RouterOS script update
by Marius Petrescu 23 Jan '18

23 Jan '18

Hello, Mikrotik released its new RouterOS version 6.41, with some changes affecting the gateway script. I released an updated script version to address this issue. For those using pre-6.41 ROS, the update is not necessary. If you want to correct the script manually, just delete the line referring to neighbor discovery disabling in the 'add new tunnel' section of the ampr_gw script whic states: /ip neighbor discovery set $gw discover=no As usual, download at: http://www.yo2loj.ro/hamprojects/ http://yo2tm.ampr.org/hamprojects/ Marius, YO2LOJ

4 5

Contact...
by SP2L＠wp.pl 19 Jan '18

19 Jan '18

Hello Jean-Luis Kindly please kontact me off the list. Best regards. Tom – SP2L

2 1

Contact...
by SP2L＠wp.pl 19 Jan '18

19 Jan '18

Hello Jean-Luis / F1GBD Kindly please kontact me off the list. Best regards. Tom – SP2L

1 0

Gateway inside of pfSense DMZ: It WORKS!
by Tom C 08 Jan '18

08 Jan '18

Currently running on a Raspberry Pi in a pfSense DMZ on residential Dynamic IP. Marius’ ampr-ripd compiled with no issue, the scripts from my linux gateway that I worked on with Lynwood work perfectly with no modification. Need to do a little tweaking with iptables firewall as my network implementation is different from what it was when I was running one box. Diagram: (Internet)===<pfSense>==(DMZ)==<Raspberry Pi>==(44.98.63.0/29) - I’m NAT forwarding ipip traffic that hits the pfSense external interface to the DMZ (usb NIC) interface on the Pi. - tunnel script and ampr-ripd run on the pi creating tunl0 on the pi - local AMPR segment on the Pi native interface. - pfSense NATs outbound encapsulated traffic making it appear as if it comes from the pfSense box. - My gateways appears on Marius map. Working on documentation for the wiki and will post by weeks end. —tom -- 73 de N2XU/Tom Cardinal/MSgt USAF (Ret)/BSCS/Security+/IPv6 Certified

2 1

Re: [44net] Changes afoot on my gateway (Tom Cardinal)
by Luzemário Dantas 07 Jan '18

07 Jan '18

Hi Tom, Some tome ago I was fiddling with pfSense to make it my gateway. I abandoned this idea because there was a couple of key issues for me: - BSD needs a device for each IPIP tunnel, this gets the things much more harder to setup; - PfSense does not have the protocols used enabled by default, needing manual edit of the web interface after each update. You have to do it by yourself every time; - Linux has ready made scripts to get the job done. These scripts were made by good hams here and tested by several other people. It is easier to create a small virtual machine and put a 256MB RAM Devuan working than creating a gateway using BSD. - PfSense team is minded to get the commercial way of pfSense as a product, so do not expect any support to get the things working. Their support forum is getting more unconcerned every day. If you are still inclined to use some type of BSD firewall as an AMPRNet gateway, I suggest using OPNSense to start. It was a project forked from pfSense, but today have only 10% of original code and have open source as priority yet. Their forum is much more friendly and responsive. OPNSense has all protocols listed in the web interface, so passing IPIP traffic back and forth is more intuitive (I still would not use it as a gateway anyway). Hope this helps, 73 de PT2LDR Luzemario www.luzehost.com.br Em 06-01-2018 18:00, 44net-request(a)mailman.ampr.org escreveu: > Greetings, > I was working with Dan Cooper last spring to turn my pfSense box into > an ampr gateway. At the time I was trying to learn how IPIP worked AND > how BSD (pfSense) worked. I'm pretty well versed in linux... BSD... > not so much. > > At the time I moved to Linux and Lynwood helped me get my head around > how the IPIP tunneling works. After seeing the volume of traffic that > tries to crack into my residential ISP connection (even though it > fails) I've decided to put my ampr gateway into a DMZ. I'm currently > in the process of moving my AMPR gateway into a pfSense DMZ. > > I work in a loosely security related position at work and I'm doing > this as a security measure to knock down some of the noise my Linux > gateway/Router/Firewall/AMPRgateway was seeing, mostly from Russia, > China and other places that I didn't research. My new AMPR gateway > will still be on Linux, actually Raspbian on a Raspberry Pi, but the > only traffic it'll ever see is encapsulated traffic and traffic from > my network because all of the other noise will be filtered by the > pfSense box and won't exist in my DMZ. > > Out of the box the pfSense user interface doesn't have support for > ipencap or AX25. I did a little bit of research (google) and found an > older post on the pfsense forum about which files to edit to add > ipencap and ax25 to the UI. Also, I just asked on the pfSense > subreddit to see if there are any other places within the pfSense UI > to edit which protocols are available for use. > > Is anyone else using this method to NAT forward IPIP traffic to an > internal gateway (in my case using pfSense). I'm looking to find out > if I've missed anything with the port forwarding before I move > forward. I know Brian (N1URO) was working with IPIP tunneling behind a > NAT and I think (THINK) this might work. > > So... here's what I've done. > > pfSense version is 2.4.2p1. File edits follow... > > In file: > /usr/local/www/firewall_nat_edit.php > > On line 708, change: > $protocols = "TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP PIM OSPF"; > > To: > $protocols = "TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP PIM OSPF > IPENCAP AX25"; > > In file: > /usr/local/www/firewall_nat_out_edit.php > > On line 510, change: > $protocols = "any TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP carp pfsync"; > > To: > $protocols = "any TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP carp > pfsync IPENCAP AX25"; > > In file: > /usr/local/www/firewall_rules_edit.php > > Insert as line 1315 and 1316: > 'ipencap' => 'IPENCAP', > 'ax25' => 'AX25', > > -- > Tom / n2xu / MSgt USAF (Ret) / BSCS, CASP

2 1

Changes afoot on my gateway
by Tom Cardinal 07 Jan '18

07 Jan '18

Greetings, I was working with Dan Cooper last spring to turn my pfSense box into an ampr gateway. At the time I was trying to learn how IPIP worked AND how BSD (pfSense) worked. I'm pretty well versed in linux... BSD... not so much. At the time I moved to Linux and Lynwood helped me get my head around how the IPIP tunneling works. After seeing the volume of traffic that tries to crack into my residential ISP connection (even though it fails) I've decided to put my ampr gateway into a DMZ. I'm currently in the process of moving my AMPR gateway into a pfSense DMZ. I work in a loosely security related position at work and I'm doing this as a security measure to knock down some of the noise my Linux gateway/Router/Firewall/AMPRgateway was seeing, mostly from Russia, China and other places that I didn't research. My new AMPR gateway will still be on Linux, actually Raspbian on a Raspberry Pi, but the only traffic it'll ever see is encapsulated traffic and traffic from my network because all of the other noise will be filtered by the pfSense box and won't exist in my DMZ. Out of the box the pfSense user interface doesn't have support for ipencap or AX25. I did a little bit of research (google) and found an older post on the pfsense forum about which files to edit to add ipencap and ax25 to the UI. Also, I just asked on the pfSense subreddit to see if there are any other places within the pfSense UI to edit which protocols are available for use. Is anyone else using this method to NAT forward IPIP traffic to an internal gateway (in my case using pfSense). I'm looking to find out if I've missed anything with the port forwarding before I move forward. I know Brian (N1URO) was working with IPIP tunneling behind a NAT and I think (THINK) this might work. So... here's what I've done. pfSense version is 2.4.2p1. File edits follow... In file: /usr/local/www/firewall_nat_edit.php On line 708, change: $protocols = "TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP PIM OSPF"; To: $protocols = "TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP PIM OSPF IPENCAP AX25"; In file: /usr/local/www/firewall_nat_out_edit.php On line 510, change: $protocols = "any TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP carp pfsync"; To: $protocols = "any TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP carp pfsync IPENCAP AX25"; In file: /usr/local/www/firewall_rules_edit.php Insert as line 1315 and 1316: 'ipencap' => 'IPENCAP', 'ax25' => 'AX25', -- Tom / n2xu / MSgt USAF (Ret) / BSCS, CASP

5 4

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

44net January 2018