44net June 2022

44net@mailman.ampr.org

19 participants
11 discussions

New to amprnet have some questions
by ken＠kc2idb.net 10 Jul '22

10 Jul '22

Hello all, So I have been assigned a block of IPs and have successfully created a gateway. I am able to pass traffic trough it as expected and it works as one would expect. However... My intended use case for amprnet includes a lot of VOIP traffic, which as we all know is heavily dependent on latency and bandwidth. I am currrently utilizing the IPIP tunnel approach to connect my gateway into the system. My questions are, 1. If I deploy my VOIP services on 44Net with my current configuration, what are the pitfalls? 2. If I announce my gateway via BGP will my throughput then be limited to uscd gateway, or will it be based on my connection speed? 3. I know some vpn capabilities have been introduced into the system, I presume that my connection will then be rated based on the connection at the VPN server location. Thank you so much! I appreciate the opportunity given here to learn and expand my knowledge. 73, de KC2IDB

5 4

No RX-packets receiving
by Dalibor Berka 26 Jun '22

26 Jun '22

Hello, Maybe someone can help me with below mentioned problem: I am starting amprnet net with that ampr-ripd using a script bellow #! /bin/bash # dotun.sh script written by N1URO on June, 2013 AMPRIP='44.177.10.10' IPMASK='255.255.255.255' HOST="medvidek.ddns.net" COMMIP=`host $HOST 2>/dev/null | head -n 1 | awk '{print $4}'` AMPRSERVER='169.228.34.84' echo $COMMIP modprobe ipip echo "1" > /proc/sys/net/ipv4/ip_forward ifconfig tunl0 $AMPRIP netmask $IPMASK ip tunnel change ttl 64 mode ipip tunl0 ip link set dev tunl0 up ifconfig tunl0 multicast /usr/sbin/ampr-ripd -t 1 -a $COMMIP -i tunl0 -p pLaInTeXtpAsSwD -f wlan0 -v -s -r ip route add default via $AMPRSERVER dev tunl0 onlink table 1 src $AMPRIP ip rule add from 44/8 pref 1 table 1 ip rule add to 44/8 pref 1 table 1 exit 0 And it worked well but now (and sometimes) I cannot receive packets from that AMPRSERVER to my tunl0 device on udp port 520 which is open (see below): root@raspberrypi:/usr/sbin# netstat -lntup | grep 520 udp 1152 0 0.0.0.0:520 0.0.0.0:* 14076/ampr-ripd and: root@raspberrypi:/usr/sbin# ifconfig tunl0 tunl0: flags=4289<UP,RUNNING,NOARP,MULTICAST> mtu 1480 inet 44.177.10.10 netmask 255.255.255.255 tunnel txqueuelen 0 (IPIP Tunnel) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 35280 bytes 9295234 (8.8 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Port 520 is also opened in net router and using: # tcpdump -i wlan0 port 520 I cannot see amprnet sevrver response. TKS/73 Libor, sysop of node OK2PEN-5

2 1

June 2022 ARDC News
by Dan Romanchik, KB6NU 22 Jun '22

22 Jun '22

This email requires a modern e-mail reader but you can view the email online here: https://www.ampr.org/?na=v&nk=91-ef731ef6ad&id=21. Thank you, Amateur Radio Digital Communications To change your subscription follow: https://www.ampr.org/?na=profile&nk=91-ef731ef6ad&nek=21-.

1 0

HamsrvPI
by Frederic Zulian 21 Jun '22

21 Jun '22

Hello, I'm looking for the iso image of HamsrvPI. hamserverpi.de/ no longer exists. Any ideas? Maybe another Linux distribution? Frédéric ZULIAN F1sxo

2 1

route entry in the RADB
by Christoph Heinecke 20 Jun '22

20 Jun '22

Hello list, maybe someone can help me and set a route entry in the RADB, or knows someone who could help me? I would like to route a /24 on the internet and for this I need the entry. Thanks a lot DO7IC Christoph

2 1

Need advise on getting on AMPRNet.
by Daniel Audet VA2DG 19 Jun '22

19 Jun '22

Hi i am seeking advise on what route i should take to setup a AMPRNet GW on my existing network. Already have a /25 subnet on 44Net. Right now i have the Archer 2600 as main router will all my wired and wifi devices with 4 access points to cover everything. I have lots of IoT devices, camera, IP phones, servers etc. over 100 devices. I am planing to set VLAN for IoT, IP-phone, Wifi Home, Wifi Guest, Server and hardwired PC and NET44. Here the possible combinations Main Router and AMPRNet GW. 1. TPLINK Archer 2600 as Main router with Ubiquiti EdgeRouter in the DMZ for Net44 2. TPLINK Archer 2600 as main router with Mikrotik Router in the DMZ Net44 3. Ubiquiti Edgerouter as main router with a VLAN and Tunel on AMPRNet. 4. Mikrotik router as main router with a VLAN and Tunel on AMPRNet What is the best one? Any suggestions are welcome -- */73's de VA2DG/* */Daniel/* Email: va2dg at va2dg dot ca

2 1

ARDC is hiring a Director of Technology!
by Rosy Schechter - KJ7RYV 16 Jun '22

16 Jun '22

Hello 44Net - I'm incredibly pleased to share that ARDC is seeking a Director of Technology (Tech Director). It's a much needed position at ARDC! This person's job will be to develop vision for and lead all of our technology efforts. These include: * general SysAdmin (with an existing service provider), * grants management software development (with an existing service provider) and * IPv4 network modernization and management. In addition to having solid technical knowledge and being an excellent manager, this person must also be an excellent communicator – able to write policy, wrangle volunteers, and manage open source technology development that includes both volunteers and contractors. This role will serve as the technical liaison to the ARDC Board of Directors and report to the Executive Director. Some important notes about this role: * The ideal candidate is a team player and team builder, able to identify requirements and expertise necessary for each of the above areas. We don’t expect one person to be able to do it all, but to define and build our technical capacity. * Experience and history with amateur radio and the internet is required. Many of the people we work with, projects we take on, and communities we make grants to are rooted in amateur radio, which has a long history and legacy. * This role is a hands-on job. Our expectation is that this person can manage our existing contractors and volunteers, while also participating technically. For a host of legal and administrative reasons, candidates must be located and legally able to work in the US. Full job posting and application instructions can be found here: https://ardc.applytojob.com/apply/bhhwDEgfza/Director-Of-Technology Please share with people who you think would be a good candidate, and feel free to ask any questions that you may have. Many thanks, Rosy -- Rosy Schechter - KJ7RYV Executive Director Amateur Radio Digital Communications (ARDC) ampr.org

1 0

How to connect to AMPR NET from OPENVPN
by tomfuller56＠gmail.com 12 Jun '22

12 Jun '22

Hello All, I am new to AMPR NET and I am trying to understand how to connect to AMPR NET from OPEN VPN. I am not sure if I have OPEN VPN correctly configured yet. If someone could please provide some basic setup and instructions how to connect to AMPR NET from OPEN VPN. Thus far I have searched the web and have not found much info besides configuration errors in OPEN VPN that others have encountered. 1. Can anyone please let me know what message I will receive on the OPEN VPN to let me know it is working properly. 2. And once OPEN VPN is configured correctly how do I connect to the AMPR NET? 3. Will I need any kind of 44 address to access the AMPR NET from OPEN VPN or can I still explore AMPR NET just thru the OPEN VPN? thanks in advance, Thomas Fuller KE4QCM

4 4

44Net Assessment Kickoff - Survey!
by Rosy Schechter - KJ7RYV 04 Jun '22

04 Jun '22

Hello 44Net Mailing List, There has been a lot of discussion on this list about the state of 44Net. Some people like how it works, some would like to see an upgrade. In order to make an informed decision that takes a variety of viewpoints into account, ARDC is conducting an assessment. For the first phase, we’ve put together a survey, which we'd love for you to fill out. Our aim is to get input from as many people as possible to help influence the network’s next chapter. Click here to go to the survey: survey.ardc.net (Please note that the above is a redirect.) We expect that it will take around 15 minutes to complete. The survey is currently being translated into French, German, and Japanese, shoud you prefer to take it in another language. Thank you for your patience as we complete professional translations. We’ll post them here as soon as they are ready! It’s important to note: the survey is not a voting mechanism - it’s a research tool. We’ll also be conducting interviews and focus groups with a subset of users. Results from all research will be shared publicly (personal information excluded) on ampr.org. If you have questions about this survey or are interested in being interviewed or part of a focus group, reach out to us at any time: contact(a)ardc.net. You can also follow the assessment’s progress by signing up for our newsletter. Thank you in advance for sharing your input - we look forward to reading your responses! Warmly, Rosy & the ARDC team -- Rosy Schechter - KJ7RYV Executive Director Amateur Radio Digital Communications (ARDC) ampr.org

15 22

ARIN Non auth
by MD 02 Jun '22

02 Jun '22

Chris For our routing we now have our Static IP address from T-Mobile 5G. It is: 162.191.104.176 We have tried the Unbuntu Linux info but have had no success for the IPIP tunnel. Do you need any further information as the encap(date).txt does not show our allocation: 44.63.63.128/26 in the encap file? Previous Email ... C 44.63.63.128 /26 might be non listed. We are not up yet. M K7MDI

4 3

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

44net June 2022