Hello
Since 1 week I started to have problems with ampr-ripd settiing.
The reception of response packets from 169.228.34.84 on port 520 udp
are not coming. Before abt 1 week the reception went normally.
The problem occures at all IPs of 44.63.16.116/28 subnet.
Below examples:
For OK0NMG-5:
[root@ok0nmg ~]# ifconfig tunl0
tunl0: flags=4289<UP,RUNNING,NOARP,MULTICAST> mtu 1480
inet 44.63.16.110 netmask 255.255.255.255
tunnel txqueuelen 0 (IPIP Tunnel)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20599 bytes 5164325 (4.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
For OK2PEN-5
tunl0: flags=4289<UP,RUNNING,NOARP,MULTICAST> mtu 1480
inet 44.63.16.112 netmask 255.255.255.255
tunnel txqueuelen 0 (IPIP Tunnel)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 892 bytes 223304 (218.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
For OK2KOJ-5
tunl0 Link encap:IPIP Tunnel HWaddr
inet addr:44.63.16.111 Mask:255.255.255.255
UP RUNNING NOARP MULTICAST MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:106074 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:27842124 (26.5 MiB)
All setting in amprnet portal are correct and reset.
73 Dalibor OK2PEN (PY2ZEN)