Re: [44net] locked

Thanks John I'm going to be working on that this morning. I was having problems with trying to do this last nite as I'm going to give it another try this morning. I'll let you know how it turns out. Dale KJ6IX -----Original Message----- From: 44Net [mailto:44net-bounces+kj6ix=arrl.net@hamradio.ucsd.edu] On Behalf Of John Wiseman Sent: Tuesday, January 05, 2016 1:34 AM To: 'AMPRNet working group' Subject: Re: [44net] locked (Please trim inclusions from previous messages) _______________________________________________ If your router can be configured to forward IPIP (IP protocol 4) to your 44ENCAP address then that is the better solution, but if not you should be able to put the address specified in the 44ENCAP line into the DMZ. 73, John -----Original Message----- From: 44Net [mailto:44net-bounces+john.wiseman=cantab.net@hamradio.ucsd.edu] On Behalf Of Dale Yanz Sent: 05 January 2016 05:41 To: 'AMPRNet working group' Subject: Re: [44net] locked (Please trim inclusions from previous messages) _______________________________________________ Thanks I'm currently using a D-Link DIR-615 Which one would fit the bill ?? Dale KJ6IX -----Original Message----- From: 44Net [mailto:44net-bounces+kj6ix=arrl.net@hamradio.ucsd.edu] On Behalf Of Don Poaps Sent: Monday, January 04, 2016 9:36 PM To: AMPRNet working group Subject: Re: [44net] locked (Please trim inclusions from previous messages) _______________________________________________ Dale I got the same message in BPQ32 console. My Router would not let IPIP in or Out. N9PMO routing AMPR net via BPQ to my system. Util I can get a Router that with route IPIP. I'm stuck. Don va7dgp On Monday, 4 January 2016, Dale Yanz <kj6ix_n6spk(a)charter.net> wrote: -- *Don Poaps* *New Westminster, BC* *VA7DGP*