Razvan,
The easiest way to do this is to request that ARDC staff delegate your
rDNS zone to a set of nameservers that you control. That is, set NS
records on 77.32.44.in-addr.arpa pointing to your nameservers. Then,
you can set them however you want.
You'll need to open a support ticket requesting rDNS delegation. They
will send you a document listing the requirements for your
nameservers. I would share it, but they haven't published it for some
reason, so I'm not sure if they're trying to keep it within a closed
group. Once your nameservers are compliant with those requirements,
you can provide them your nameserver addresses and the address of at
least one PTR record to test and they will (eventually) delegate the
zone.
Forewarning: this process has taken an extremely long time in my
experience (I just got mine delegated the other day after 5 months of
waiting).
73,
Eric AE0JE
On Fri, Jun 7, 2024, 9:14 AM Razvan YO6RZV via 44net
<44net(a)mailman.ampr.org> wrote:
Hello everyone,
I have a question for those of you who have BGP announced subnets
from
44Net, specifically regarding the configuration of rDNS (PTR)
records
for each IP address within the subnet.
Recently, I received an allocation of a /24 subnet, which is
announced
via my Data Center's ASN. Everything is functioning correctly, but I
need to configure rDNS for each IP address. This configuration is
essential for hosting email servers to prevent potential issues.
Here is a dlint output for my gateway's IP address:
root@eye:~# dlint 1.77.32.44.in-addr.arpa
;; dlint version 1.4.0, Copyright (C) 1998 Paul A. Balyoz
<pab(a)domtools.com>
;; Dlint comes with ABSOLUTELY NO WARRANTY.
;; This is free software, and you are welcome to redistribute it
;; under certain conditions. Type 'man dlint' for details.
;; command line: /usr/bin/dlint 1.77.32.44.in-addr.arpa
;; flags: inaddr-domain recursive.
;; using dig version 9.9.5
;; run starting: Fri Jun 7 15:10:37 EEST 2024
;; ============================================================
;; Now linting 1.77.32.44.in-addr.arpa
ERROR: no name servers found for domain 1.77.32.44.in-addr.arpa
===
;; Now linting 32.44.in-addr.arpa
;; Checking serial numbers per nameserver
;; 2024060700
ns1.de.ardc.net [1].
;; 2024060700
ns.ardc.net [2].
;; 2024060700 a.gw4.uk [3].
;; 2024060700
ns2.us.ardc.net [4].
===
Based on this output, I believe that the rDNS setup needs to be
handled
by the ARDC staff. However, I wanted to confirm this to ensure I
proceed
correctly.
I reached out to Chris off-list and received the following response:
"You already have the subdomain
yo6rzv.ampr.org [5] setup; you can
add DNS
records under there. For each A record, a PTR record is
automatically
added in the reverse zone."
From my understanding, this does not fully address my requirements,
since for example, if IP Address 44.32.77.2 needs to have the rDNS
set
to ->
something.yo44.net [6], this will not help.
I am aware that Chris and the ARDC staff are currently handling a
high
volume of tickets and requests through the portal. Therefore, I am
turning to the community for assistance to avoid adding more to
their
workload.
I appreciate any guidance you can provide and apologize in advance
if
this question has been addressed previously. I could not find
relevant
information in my email archive.
Thank you for your assistance.
Best regards,
Razvan - YO6RZV
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org