8 Mar
2018
8 Mar
'18
4:08 p.m.
Ah ok. Now I see those routes have their gateway in their own subnet.
This is one situation where the routes are dropped since we have no
solution for them and get dropped (implemented since 1.13 up to 1.16).
In newer versions than 1.16, there should be 2 route entries created by
ampr-ripd:
44.24.172.40/29 via 44.24.172.41
44.24.172.41/32 via default gateway as defined by the -g option (encap
would be NAT-ed by your router and sent to the endpoint via internet).
if -g is not set, those subnets will be dropped.
On 08.03.2018 20:59, Gustavo Ponza wrote:
TNX Marius.
No way from here to route towards that addresses;
I see that other similar situations are managed
OK. However the ampr-ripd has been effective to
delete that routes and so peace is done :)
73 and ciao, gus i0ojj/ir0aab
On 03/08/2018 09:03 AM, marius(a)yo2loj.ro wrote:
Those are no errors.
You need to route the endpoints (which are BGP published)
individually via
your gateway to the internet and it will work.
Ampr-ripd does this if you set the proper parameters.
Marius, YO2LOJ
> Hi, to all concerned,
>
> found the following errors by making the 'source' of the
> actual 'encap.txt' file.
>
> Can't add route to 44.24.172.40/29 via encap 44.24.172.41
> Can't add route to 44.130.104/24 via encap 44.130.104.1
> Can't add route to 44.130.105/24 via encap 44.130.105.1
> Can't add route to 44.130.106/24 via encap 44.130.106.1
> Can't add route to 44.130.107/24 via encap 44.130.107.1
> Can't add route to 44.131.14.252/31 via encap 44.131.14.253
> Can't add route to 44.136.150/23 via encap 44.136.150.2
>
> --
> 73 and ciao, gus i0ojj/ir0aab
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net