Re: [44net] EdgeRouter Lite (and probably others) full tunnel setup

Hi every one.. been fiddling with my spare edgerouter X for the last hours. I was able to upgrade it to firmware 2.0 and all was well. I then followed the howto from Marius. There are some minor typos in the how to. but nothing too complicated to fix. Nice job Marius, with out that I would have been totally lost. Now I am at the step where you run the script the first time. I have that answer: ./ampr.sh Error: any valid prefix is expected rather than "table". Before doing anything more I think the problem is here in the script: ip rule add from $MY_IP table default changed to: ip rule add from $MY_IP default then no more error. but still no joy. no route showing at all.. I also wanted to feed all the traffic from the tun44 interface to eth4 but I dont get where to do this.. do I need a bridge? could I also use a dhcp server to configure the client connecting to eth4. need to fiddle some more.. ________________________________ De : 44Net <44net-bounces+petem001=hotmail.com(a)mailman.ampr.org> de la part de Marius Petrescu <marius(a)yo2loj.ro> Envoyé : 20 février 2019 16:54 À : 44net(a)mailman.ampr.org Objet : Re: [44net] EdgeRouter Lite (and probably others) full tunnel setup Ok, I'll try again, now using a linked document, since that's unreadable... http://www.yo2loj.ro/hamprojects/EdgeRouter_AMPR_setup.rtf http://yo2tm.ampr.org/hamprojects/EdgeRouter_AMPR_setup.rtf Have fun, Marius, YO2LOJ _________________________________________ 44Net mailing list 44Net(a)mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net