8 Feb
2018
8 Feb
'18
6:17 a.m.
Hi Kevin,
You are probably missing the forward of protocol 4 to your internal
local machine by your router.
On 07.02.2018 17:44, Kevin Fox wrote:
> I have followed the directions in http://lz4ny.eu/en/amprnet-44-rip/ to setup my GW,
but all I get when I run ampr-ripd is the following
>
>
> root@thor:/home/w0kcf# ampr-ripd -d -i tunl0
> Using gateway 192.168.1.1 for direct 44net endpoints via interface enp0s18.
> Waiting for RIPv2 broadcasts...
>
> Network configuration is as follows
> w0kcf@thor:~$ ifconfig
> enp0s10 Link encap:Ethernet HWaddr 00:14:6c:81:ff:fe
> inet addr:44.26.1.80 Bcast:44.26.1.95 Mask:255.255.255.240
> inet6 addr: fe80::214:6cff:fe81:fffe/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:16335 errors:0 dropped:10870 overruns:0 frame:0
> TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:1273233 (1.2 MB) TX bytes:6874 (6.8 KB)
>
> enp0s18 Link encap:Ethernet HWaddr 00:13:8f:7a:c8:aa
> inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0
> inet6 addr: fe80::213:8fff:fe7a:c8aa/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:23028 errors:0 dropped:0 overruns:0 frame:0
> TX packets:17964 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:6155448 (6.1 MB) TX bytes:2789754 (2.7 MB)
>
> What am I missing?
>
> 73
> Kevin W0KCF
>