8 Mar
2016
8 Mar
'16
11:35 a.m.
Andrew,
Post your config and I can help you with what you have.
jerry, KD4YAL
On Tue, Mar 8, 2016 at 10:34 AM, Andrew Green <andrew(a)andrewgreen.ca> wrote:
> (Please trim inclusions from previous messages)
> _______________________________________________
> Jerry,
>
> I’d love to see your cisco config as well, I’m playing with a (free to me)
> 2691 behind a NAT and trying to figure out what I have configured wrong.
>
> -Andrew
> VO1ABC
>
>
> > On Mar 4, 2016, at 4:06 PM, Jerry DeLong <kd4yal(a)gmail.com> wrote:
> >
> > (Please trim inclusions from previous messages)
> > _______________________________________________
> > Hi Ronen,
> >
> > Here are the script I am using.
> > I am not a coded so maybe there is a better way but these 2 script
> > are working for my purpose.
> >
> > Here it is with out warranty or support.
> >
> > -------------------------------------
> > #!/bin/sh
> > # 8-Jan-2016 KD4YAL
> > #
> > #HOME=/home/myhome
> > #
> > rm -rf encap.txt
> > #
> > wget ftp://USER:PASSWORD@portal.ampr.org/encap.txt
> > #
> > #
> > echo -e "Download Completed ........."
> > #
> > echo -e "Converting Encap.txt for the ampr-tunnel-config
script......"
> > # remove old ampr-tunnel-config
> > rm -rf ampr-tunnel-config.txt
> > #
> > perl /home/myhome/encapconvertnew.pl encap.txt
> > # /home/jdelong/perl encapconvertnew.pl encap.txt
> > echo -e "The Script is Completed....."
> > #
> > echo -e "dumping ampr-tunnel-config script to router"
> > # connect to router
> > /home/myhome/script2
> > #
> > echo -e "Routing updates completed....."
> > # <EOF>
> >
> >
> > #!/usr/bin/expect
> > #8-Jan-2016 KD4YAL
> > #
> > # Get the commands to run, one per line
> > set f [open "/home/myhome/ampr-tunnel-config.txt"]
> > set commands [split [read $f] "\n"]
> > close $f
> > #
> > spawn ssh MYUSERNAME@ROUTERIP
> > expect "?assword:"
> > send "MYPASSWORD\r"
> > # Goto configure mode
> > expect "#"
> > send "conf t\r"
> > #
> >
> > # Iterate over the commands
> > foreach cmd $commands {
> > expect "(config"
> > send "$cmd\r"
> > }
> >
> > # Tidy up
> > expect "#"
> > send "wr mem\r"
> > expect "#"
> > send "exit\r"
> > expect eof
> >
> > ---------------------------------------
> >
> >
> >
> > Jerry, KD4YAL
> >
> > On Fri, Mar 4, 2016 at 10:25 AM, R P <ronenp(a)hotmail.com> wrote:
> >
> >> (Please trim inclusions from previous messages)
> >> _______________________________________________
> >> Hi there
> >>
> >> My CS8251 works very well
> >>
> >> I need a idea how to make it get the Updated encap file automatically
> >>
> >> I do it now by Cut and paste but know that TFTP can do the job as
> well
> >>
> >> I need a solution that this can be done automatic (by batch or
> script)
> >>
> >> Any ideas , Solutions welcome
> >>
> >> Regards
> >>
> >> Ronen - 4Z4ZQ
> >>
> >> http://www.ronen.org
> >>
> >> Ronen Pinchooks (4Z4ZQ) WebSite<http://www.ronen.org/>
> >> www.ronen.org
> >> ronen.org (Ronen Pinchooks (4Z4ZQ) WebSite) is hosted by
> domainavenue.com
> >>
> >>
> >>