10 May
2019
10 May
'19
7:24 p.m.
Thank you for explaining, I totally misunderstood the purpose. Either way,
thanks for the quick responses, I really appreciate it. I was mainly
looking at https://qsl.net/k/kb9mwr//wapr/tcpip/lotw-vpn.html which led me
to believe that was possible.
-Nate
On Fri, May 10, 2019 at 2:28 PM Heikki Hannikainen <hessu(a)hes.iki.fi> wrote:
Hi,
No. If you're using ipencap to join the amprnet tunnel mesh, you don't
need to use my VPN service.
If you use the VPN, you can't use ipencap at the same time.
With the VPN you get a single tunnel to the Amprnet, and you'll be
assigned a dynamic 44.139.11.x IP address during the VPN session.
It is not possible to route your own 44.x.y.z subnet via this VPN. You're
limited to communicating with the dynamic 44.139.11.x address assigned to
you by the VPN server. Sorry!
On Fri, 10 May 2019, Nate Sales wrote:
- Hessu
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net
Ok thank you! So the ip in the 44.139.11.x range
becomes the gateway,
then
just set up ipencap like normal?
-Nate
On Fri, May 10, 2019 at 8:29 AM Heikki Hannikainen <hessu(a)hes.iki.fi>
wrote:
> On Thu, 9 May 2019, Ruben ON3RVH wrote:
>
>> If the subnet is routed to the openvpn server, the openvpn server can
>> route that network to the endpoint.
>
> This particular openvpn server (that I run) does not offer such a
service.
> It allows you to get connected to AMPRnet,
but I don't have the time to
do
> custom configurations to route subnets or do
other per-user manual
> tweaking at this time.
>
> So, Rob's "You can't" answer is correct. You'll get the
dynamic
> 44.139.11.x IP address and you can use that to communicate with the
> amprnet. Sorry!
>
> - Hessu
>
>
>> On 9 May 2019, at 11:14, Rob Janssen <pe1chl(a)amsat.org> wrote:
>>
>>>> I cant figure out where to go
>>>> from here. Can anyone point me in the right direction in how to get
the
>> routes set up for my little subnet?
>
> You can't.
> Such a VPN offers you a connection, with an IP, and routes traffic for
that IP
to you.
> You cannot route arbitrary subnets over that
because you cannot setup
routes on the VPN server
> pointing to your subnet.
>
> If that is what you want, you need to setup a gateway on the IPIP
tunnel
mesh.
> Or, find someone else who has done that and
arrange for some VPN
between you two.
>
> Rob
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net