1 Apr
2020
1 Apr
'20
12:14 p.m.
I’ve got this setup on a ER4, would you like the config?
You basically need to do some source routing.
Andy
Sent from my iPhone
On 1 Apr 2020, at 15:40, Corey Dean via 44Net
<44net(a)mailman.ampr.org> wrote:
Check the wiki. I know there were notes on how to set it up to go out the
44 net on the ubiquity edgerouter, or at least there use to be.
Corey N3FE
On Wed, Apr 1, 2020 at 9:49 AM Elias Basse via
44Net <44net(a)mailman.ampr.org>
wrote:
I have just completed setup on a ubiquiti router and am wanting to
configure a host for some digital radio services behind the router but wish
to use the 44 addresses out to the public internet to allow hotspots and
repeaters to connect. Is anyone familiar with setting this up? From the
server I am able to reach the internet but it is going out through an
address from the isp rather than the 44 address. I used the ampr-ripd
script from the wiki and can ping other 44 addresses.
Hopefully this is possible, I have had my office allow use of some server
and network hardware for ham radio.
Best Regards
Elias
Kd5jfe
Sent from my iPhone
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net