So I have a linBPQ node running on a Debian VM at Google and it's
working on my assigned public IP there. I found that while they can do
BGP announce of a 44 net subnet but it'd take a bit futzing around that
I'm reserving for if I can't do an IPIP tunnel from there.
My bpq32.conf has this for my IPGateway config
IPGATEWAY
# My Pub IP 35.209.142.98
# My Int IP 10.128.0.56
ADAPTER ens4
44ENCAP 10.128.0.56
IPAddr 44.46.15.1/24
IPPorts 1,2,3
NAT 44.46.15.5 10.128.0.56
****
and I have 2 firewall rules setup besides the ones I need for BPQ stuff
(telnet and AXIP links)
ACCEPT IP 169.228.34.84 all protocols
ACCEPT IP 0.0.0.0/0 IPIP
I'd think the 2nd one would cover everything I'd need but I decided to
go ahead and make one to accept anything from the 44net Gateway at
169.228.34.84 just in case.
Anyone else attempted anything like this? I know I could go setup
something with vultr but I'm trying to keep all my VMs in once place if
possible (and avoid a 2nd hosting bill)
--
--
Matthew Chambers, NR0Q
--
The content of this email is confidential and intended for the
recipient
specified in message only. It is strictly forbidden to share
any part of
this message with any third party, without a written consent
of the
sender. If you received this message by mistake, please reply to
this
message and follow with its deletion, so that we can ensure such a
mistake
does not occur in the future.
Please do not print this email unless it is
necessary. Every unprinted email helps the environment.