17 Feb
2019
17 Feb
'19
4:42 a.m.
If you can make it work on eth4 as the 44 net gateway and eth0 eth1 as a simple wan/lan
combo like on any normal home router this would be marvelous.
Envoyé de mon iPad
Le 16 févr. 2019 à 22:57, Tom Cardinal via 44Net
<44net(a)mailman.ampr.org> a écrit :
I ‘be been digging around and downloaded the Vyatta 6.3 docs. The forums at UBNT
Community suggest that the docs for Vyatta are the best out there and that the CLI
interface for EdgeOS I based on Vyatta...
Tuesday will be good for me to start. I brought my ERL with me on a weekend trip and I’m
working in the CLI.
—Tom
Sent from my iPad
On Feb 15, 2019, at 3:09 PM, Marius Petrescu
<marius(a)yo2loj.ro> wrote:
Hi guys,
I just ordered a Edgerouter Lite and it will probably arrive on Tuesday. Next week is a
little full, but after that, we're gone do this :-)
I will keep you up to date.
73s de Marius, YO2LOJ
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net On 15.02.2019 15:40, Tom Cardinal via 44Net
wrote:
Awesome,, but I’m out of pocket until Monday evening.
I have a basic ER setup installed in the DMZ of my pfSense which in the past NATed my
ipip traffic. I have not yet created the ipip tunnel to UCSD but will do so on Monday
evening or Tuesday.
I’m looking forward to this project.
— tom
Tom Cardinal / MSgt USAF (Ret) / N2XU / BSCS / CASP+
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net