18 Feb
2021
18 Feb
'21
10:19 p.m.
Hi Everyone,
I am trying to set up a BPQ node for access over the 44net and I have been
running into trouble getting the connection working. I am running into an
issue where I am not able to ping any 44 nodes. I can ping the local 44net
interface, but can't ping past that.
The host is in a DMZ, so it should be receiving the rip44 table. Even
though the IPs are internal, I scrubbed them. What am I missing here?
I am not able to ping any 44net nodes. I pulled 44.44.6.33 for sample:
ping 44.44.6.33
PBSNOD:W7PBS-7}
OK
My arp table:
arp
PBSNOD:W7PBS-7}
x.x.x.191 70:2a:d5:4a:29:9d 255 E 2770
The portion of bpq32.cfg for configuring the 44net connection. Port 1 is
AXIP and Port 3 is the telnet port.
IPGATEWAY
Adapter \Device\NPF_{64EA23A4-79E1-4342-83E5-E92D65C2CA3D}
44ENCAP x.x.x.147 # Enable AMPRNET Tunnels and RIP44. I used 148 as the
Tunnel Enpoint
IPAddr 44.124.1.17 #This is the first IP in your AMPRnet allocation.
IPNetmask 255.255.255.248 #AMPRnet netmask (Why is this 248 ? This is for
your AMPRnet subnet. Your AMPRnet subnet is /29)
IPPorts 1,3
ARP 44.124.1.17 x.x.x.147 3 D
route 44.124.1.16/29 44.124.1.17
; AMPRnet routes.
route addprivate 44.124.1.16/29 encap 70.167.209.246
; Arizona routes
route addprivate 44.124.9.0/24 encap 65.49.149.125
route addprivate 44.124.7.0/25 encap 174.74.248.93
route addprivate 44.124.10/30 encap 50.116.8.127
route addprivate 44.124.1.8/29 encap 107.2.6.33
Thank you for your time,
Christopher Kelley
KG7UJH