[44net] Small corrections and a bug fix: ampr-ripd 1.6.2 and amprd 1.6

Hello, I made some small fixes without major functional impact to ampr-ripd: - Routes where not cleaned up in debug mode, after hitting CTRL-C - If RIP forwarding was used and the forward interface became inactive/disappeared, the daemon would not be able to send any RIP updates. This use case can occur e.g. if ampr-ripd is providing RIP broadcasts for a jnos via a tunnel. On jnos crash the tunnel would fail and would not receive route updates after restart (tnx. Gus, I0OJJ for report and testing the fix). If these issues have not bothered you until now, there is no urge to upgrade. There was also a bug in amprd, which would not set the needed host routes if rip_set_routes was set to 'no'. Also, the password is hard coded in amprd, too (like in ampr-ripd). Sooo: http://www.yo2loj.ro/hamprojects/ampr-ripd-1.16.2.tgz http://www.yo2loj.ro/hamprojects/amprd-1.6.tgz http://yo2tm.ampr.org/hamprojects/ampr-ripd-1.16.2.tgz http://yo2tm.ampr.org/hamprojects/amprd-1.6.tgz Have fun! Marius, YO2LOJ