Re: [44net] Help with first time setup on a edgerouter

Thank you for the reply. The request for DNS was sent thru the portal, by sending a message to the coordinator. Is this the correct method to make this request? There has been no response. Thank you. Chris On Sunday, March 13, 2022, 03:51:20 AM PDT, Chris Smith via 44Net < 44net(a)mailman.ampr.org&gt; wrote: Hi Chris, Did you register your IP in DNS? You need an A record for your IP address (any IP addresses you are routing) in order for it to pass the UCSD gateway out to the internet. You can do this by asking your local coordinator or by asking myself. 73, Chris - G1FEF my edgerouter 8. the port from eth2 to eth7 i as unable to ping thru to the internet as described in the instructions. same result of not being able to ping thru to 8.8.8.8 on the edgerouter 4, thus i am continuing with the edgerouter 8 as this would be my final configuration. both directions thus the tunnel appears to be up. simulate the UCSD end of the tunnel and a Layer 3 switch was used to simulate the internet connection. expected, this leads me to believe i may have the setup correct or at least very close. greatly appreciated. _________________________________________ 44Net mailing list 44Net(a)mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net _________________________________________ 44Net mailing list 44Net(a)mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net