Re: [44net] Tunnel to UCSD refuse to work on my mikrotik

Dear Rob Of course im not intend to enter manually 400 routes Cant the Script done in Perl ? I have a perl installed already (for updating the Cisco) so if a script can be done in perl that can help If not , then i will install Pyton also I have asked the local hams and they redirect me to the Pyton for PC and after I showed them the Scripts they told me how to operate it Im not sure if it will run on PC they told me that there are certain things that run under linux next days we will know ... and thanks for the /export command I have already backup the config and upgrade the router to the latest version Im now taking out the old TP-Link gear (i will now install on it OpenWRT to play with it a little) . I think I will write a paragraph in the Wiki for the Mikrotik home routers Thanks all of you for all the help i certainly wouldn't do it so quick without your help because the syntax (and concept) is totally different then Cisco I may probably have some more questions but the big problem looks behind . Regards Ronen - 4Z4ZQ http://www.ronen.org ________________________________________ From: 44Net <44net-bounces+ronenp=hotmail.com(a)hamradio.ucsd.edu> on behalf of Rob Janssen <pe1chl(a)amsat.org> Sent: Saturday, April 9, 2016 12:26 PM To: 44net(a)hamradio.ucsd.edu Subject: Re: [44net] Tunnel to UCSD refuse to work on my mikrotik (Please trim inclusions from previous messages) _______________________________________________ You have to use that python program, it is not practical to do this (and keep doing this) manually. But I already told you to use /export to get the config which also explains how you could do it manually. Rob