Re: [44net] how to route Mikrotik Gateway Commercial IP to the ISP and not to UCSD ?

Marius and others I have tried to do something but something dont work first of all i can not do default route to the ISP without doing the other 44 Net Route policy and since i didnt succeed so far i had to do default route to the tunnel otherwise i had no 44 Net connectivity i have tried to follow the Mikrotik Wiki few times the explain there is far from being simple for users that are not familiar with mikrotik and here the mikrotik is almost not known (i think im among the few in the country that use it) also the photos there of the screen is not correlated to my router screen (probably due to the difference between the OS ) (i use OS6.34.4) the two lines you gave me "mark trafic" is not understandable to me how to do it here is what i want to do and what i did to accomplish it I want to route traffic from source address 192.168.1.180 (the Mikrotik NON 44 net IP that sit on the DMZ) to go via the isp (to 192.168.1.1 (the Router of the ISP) I created a mangle rule to mark connection from source address 192.168.1.180 as source-192.168.1.180 then i have added static route to route 0.0.0.0/0 (default) trafic from marked source-192.168.1.180 to 192.168.1.1 I can see that trafic couter raise in the firewall rule of the mangle rule but the trafic is not routed to the 192.168.1.1 although i see this route statement in the route table will it be easier for someone to give me the necessary commands for what i want to do in text or (prefered ) in web interface What am i doing wrong ? Regards Ronen ________________________________ From: 44Net <44net-bounces+ronenp=hotmail.com(a)hamradio.ucsd.edu> on behalf of Marius Petrescu <marius(a)yo2loj.ro> Sent: Monday, May 15, 2017 10:15 PM To: AMPRNet working group Subject: Re: [44net] how to route Mikrotik Gateway Commercial IP to the ISP and not to UCSD ? (Please trim inclusions from previous messages) _______________________________________________ - mark incoming connections from a non-44 source via tunnel with a connection mark of your liking. - mark outgoing traffic with that connection mark with a new routing mark - set the default route for that connection mark/table via tunnel