7 Jan
2017
7 Jan
'17
2 a.m.
In regards to that, you won't be doing any patching.
Directly from the website:
/usr/local/www/firewall_nat_edit.php:535:
<?php $protocols = explode(" ", "TCP UDP TCP/UDP GRE ESP ICMP");
foreach (
$protocols as $proto): ?>
/usr/local/www/firewall_nat_out_edit.php:488:
<?php $protocols = explode(" ",
"any TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP carp pfsync");
/usr/local/www/firewall_rules_edit.php:861:
$protocols = explode(" ",
"TCP UDP TCP/UDP ICMP ESP AH GRE IPV6 IGMP OSPF any carp pfsync");
If you notice, its (file):(line#) (content of line).
Basically, within those files and lines, you just need to add ipencap and
ax.25. For example:
/usr/local/www/firewall_nat_edit.php:535:
<?php $protocols = explode(" ", "TCP UDP TCP/UDP GRE ESP ICMP");
foreach (
$protocols as $proto): ?>
Should be:
/usr/local/www/firewall_nat_edit.php:535:
<?php $protocols = explode(" ", "TCP UDP TCP/UDP GRE ESP ICMP ipencap
ax.25"
); foreach ($protocols as $proto): ?>
On Fri, Jan 6, 2017 at 3:38 PM, Luzemário Dantas <luzemario(a)luzemario.net.br
wrote:
(Please trim inclusions from previous messages)
_______________________________________________
Hi guys,
Anyone of you do use pfSense? I want a clue about forwarding 44net
protocols on it without manual editing. It is FreeBSD based, but I want to
get the webConfigurator way to get 44net trafic forwarded to my Linux
Debian box.
PfSense allows NATting 44net protocols to a Linux box. But it's
webConfigurator does not show all protocols to be listed in the NAT
configuration page. Despite all IP protocols being supported in
"/etc/protocols", only the most common protocols are listed in the
protocols drop-down of NAT configuration page (it is a webConfigurator
limitation). There is a workaround by editing system files, but I am
wondering if someone already have a system patch handy to add the needed
protocols without manual editing, by using only the "System Patches"
package. I don't like the idea of myself editing system files, since I
don't know too much PHP programming.
PfSense has a System Patches package wich makes easy to change system
components (easy for the ones that understand it). Can someone help me to
build a system patch to show 44net protocols in the NAT protocol drop-down
menu?
There are some comments on the link below, but I could not figure out how
to do so by making a system patch, so anyone could apply the patch without
manual editing.
Thanks for your comments.
https://forum.pfsense.org/index.php?topic=64060.msg346690#msg346690
73 de PT2LDR
Luzemario
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
--
Miguel Rodriguez
12th Grade Student
MIGUELR-DN42 / KM4VYU
miguemely101(a)gmail.com
Tel: *561-758-0631*
*Accredited District Since 2008; Re-certification - January 2013*
Home of Florida's first LEED Gold Certified School
*Disclaimer*: Under Florida law, e-mail addresses are *public records*. If
you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.