What happens when the trustee changes?
Gotta rename everything!
Not good.
Cliff K6CLS CM87
On June 15, 2024 11:23:32 AM PDT, Eric Johnson via 44net <44net(a)mailman.ampr.org>
wrote:
Ok, makes sense. It sounds like there is a ham
responsible for maintaining
the node. Why couldn't you use that ham's callsign for DNS services?
Eric AE0JE
On Sat, Jun 15, 2024, 1:55 PM Terence Theijn <terence(a)theijn.nl> wrote:
> Ibm isn’t the user/maintainer they just host the site. They don’t have
> access to or are allowed to use the network in any way. They just host the
> pop in my example.
>
> So just providing roof access and power.
>
> 73
>
> On 15 Jun 2024, at 19:46, Eric Johnson via 44net <44net(a)mailman.ampr.org>
> wrote:
>
>
> I understand it's not a repeater, that's just the best analogy I have. We
> have a similar system here, but it's not as well-known or widespread as
> hamnet.
>
> Usually, any DNS name that resolves to an IP is equivalent. Can you
> elaborate on why you couldn't use a subdomain on a callsign?
>
> Furthermore, could you address the questions regarding non-ham (IBM) use
> of this system?
>
> Eric AE0JE
>
> On Sat, Jun 15, 2024, 1:38 PM Terence Theijn <terence(a)theijn.nl> wrote:
>
>> Hamnet pop isn’t a radio repeater. It’s a pop for hamnet. We call the 44
>> net hamnet here and it runs on wireless links.
>>
>> It’s a complete wireless mesh network with many p2p links providing
>> network connectivity to other hams/repeaters etc.
>>
>> So just adding a subdomain before a callsign isn’t going to cut the needs.
>>
>> 73
>>
>> PD3T
>>
>> On 15 Jun 2024, at 14:27, Eric Johnson <micromashor(a)gmail.com> wrote:
>>
>>
>> Chris: Sounds good, thank you.
>>
>> Terence,
>>
>> I am not the most familiar with hamnet, although at some point, there has
>> to be a ham involved, right? The way repeaters typically work here is that
>> a ham or group of hams speaks to a building owner and asks for an agreement
>> to host a repeater and a little bit of rooftop space. That repeater is then
>> usually referred to by the callsign of the ham(s) who maintain it and have
>> the agreement with the building owner.
>>
>> Forgive me if I'm misunderstanding, but does hamnet usually work in a
>> similar way? If so, couldn't the site be named
pi90ibm.pd3t.ampr.org,
>> assuming you are the maintainer of that site?
>>
>> If there isn't a ham involved at any step:
>> - How is it legal use of the amateur bands?
>> - Is it really a ham radio network at that point?
>>
>> Eric AE0JE
>>
>> On Sat, Jun 15, 2024, 6:01 AM Terence Theijn <terence(a)theijn.nl> wrote:
>>
>>> I see a lot of issues with hamnet pops without clubcallsings and are
>>> just commercial building owners willing to host the housing for a hamnet
>>> pop to extend the amprnet wireless network range.
>>>
>>> You do want those site to be recognizable some of those sites can even
>>> host services like remote sdrs.
>>>
>>> For example ibm is willing to host a pop for network coverage. To make
>>> it recognizable you can name it pi90ibm. This aint an official callsign.
>>> How is one going to verify that?
>>> Did you think about those?
>>>
>>> Regards
>>>
>>> PD3T
>>>
>>>
>>> On 15 Jun 2024, at 09:12, Chris via 44net <44net(a)mailman.ampr.org>
>>> wrote:
>>>
>>> A copy of the official PDF download from the ULS site of the club’s call
>>> sign;
>>>
>>> _______________________________________________
> 44net mailing list -- 44net(a)mailman.ampr.org
> To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
>
>