28 Sep
2022
28 Sep
'22
1:27 p.m.
Marius is correct, the DNS entry is only required in order for your packets to be passed
out to the internet and back. Without a DNS entry you can happily exchange traffic within
the IPIP mesh, but the gateway machine will block any attempt to forward packets to/from
the internet if the 44..x.x.x IP involved does not have a (matching) forward & reverse
DNS entry.
73,
Chris - G1FEF
On 28 Sep 2022, at 01:09, Marius Petrescu via 44net
<44net(a)mailman.ampr.org> wrote:
I do not think that a DNS entry for the gateway is needed to receive the RIP updates. If
you register your gateway and assign a subnet to it, you get the data via the IPIP tunnel
from amprgw.
At least it was that way at some point. Maybe Chris could clarify this.
To my understanding, the only moment you need those DNS entries is if your hosts need to
pass traffic through amprgw to the internet and back, and only affects the
routing/firewall part at amprgw.
An "official" statement on this topic would be useful.
Marius, YO2LOJ
On 28/09/2022 02:15, David Ranch via 44net wrote:
Hello Harold,
The ampr-ripd traffic does go over port 520 but within the IPIP tunnel itself (IP
protocol 4). To receive ampr-ripd traffic, you must have a DNS entry assigned to one of
your AMPR IPs. FInally, have you been able to confirm if your ISP allows/forwards IP
protocol 4 (IPIP)?
--David
KI6ZHD
On 09/27/2022 02:02 PM, Harold via 44net wrote:
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org Hey gang. Kinda new here for Ive been dabbling
with this for a few years though. I have been trying to use the ampr-ripd daemon without
any luck and have come to the conclusion that my ISP blocks port 520 which I believe is
the port used.
With that said, i have also come to the conclusion that at this time, the encap.txt file
is still accessible via ftp from the portal.ampr.org.
Is "wget ftp://USER:PASSWORD@portal.ampr.org/encap.txt
<ftp://USER:PASSWORD@portal.ampr.org/encap.txt>" a valid ftp solution and if so
where is the USER:PASSWORD derived from?
Is it our user:password into the portal?
Thanks all
Harold K7ILO
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org <mailto:44net@mailman.ampr.org>
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
<mailto:44net-leave@mailman.ampr.org>
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org <mailto:44net@mailman.ampr.org>
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
<mailto:44net-leave@mailman.ampr.org>