Re: [44net] Gateways

Hi, Using metarouter is a bit tricky, since OpenWRT is not quite stable in the metarouter. And it works only on mipsbe (and single core PPC, but that's history), so no CCR or RB100AHx2. So best try to use Toms method if it is satisfactory. Another variant would be to add a Raspberry Pi or a Alixboard or some other small factor device (instead of the metarouter) as an encapsulator/decapsulator and inject the RIPv2 data into the router, for a fully automatic setup (a device with a single ethernet interface will suffice). Marius, YO2LOJ -----Original Message----- From: 44net-bounces+marius=yo2loj.ro(a)hamradio.ucsd.edu [mailto:44net-bounces+marius=yo2loj.ro@hamradio.ucsd.edu] On Behalf Of Tom Hayward Sent: Friday, March 27, 2015 17:58 To: AMPRNet working group Subject: Re: [44net] Gateways ... If you want a contained solution with no computers other than the router, you could install an OpenWRT MetaRouter on your Mikrotik and run the Python script in that. At this point you could also just use rip44d on OpenWRT to manage the AMPR tunnels. I have not tried this. ...