Ok I have little progress with the correct tunnel address
the tunnel interface seem to receive packets when i trace route to its 44 net from the
outside world and appear to send packet as reply but still no go
I have taken all access list out
any help is welcome
Please Advice
Ronen - 4Z4ZQ
http://www.ronen.org
Cisco1005_HAIFA#sh int tun0
Tunnel0 is up, line protocol is up
Hardware is Tunnel
Interface is unnumbered. Using address of Ethernet0 (10.0.0.180)
MTU 1514 bytes, BW 9 Kbit, DLY 500000 usec, rely 255/255, load 1/255
Encapsulation TUNNEL, loopback not set, keepalive set (10 sec)
Tunnel source 10.0.0.180 (Ethernet0), destination 169.228.66.251
Tunnel protocol/transport IP/IP, key disabled, sequencing disabled
Checksumming of packets disabled
Last input 00:00:02, output 00:00:28, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 93677
Queueing strategy: fifo
Output queue 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
395 packets input, 94081 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
153001 packets output, 16476952 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Cisco1005_HAIFA#
Cisco1005_HAIFA#
Cisco1005_HAIFA#sh int tun0
Tunnel0 is up, line protocol is up
Hardware is Tunnel
Interface is unnumbered. Using address of Ethernet0 (10.0.0.180)
MTU 1514 bytes, BW 9 Kbit, DLY 500000 usec, rely 255/255, load 1/255
Encapsulation TUNNEL, loopback not set, keepalive set (10 sec)
Tunnel source 10.0.0.180 (Ethernet0), destination 169.228.66.251
Tunnel protocol/transport IP/IP, key disabled, sequencing disabled
Checksumming of packets disabled
Last input 00:00:01, output 00:00:08, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 93677
Queueing strategy: fifo
Output queue 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
505 packets input, 120749 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
153015 packets output, 16479248 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Cisco1005_HAIFA#
________________________________________
From: 44Net <44net-bounces+ronenp=hotmail.com(a)hamradio.ucsd.edu> on behalf of Brian
Kantor <Brian(a)UCSD.Edu>
Sent: Thursday, February 18, 2016 10:29 AM
To: AMPRNet working group
Subject: Re: [44net] Help in finding Tunnel Problem
(Please trim inclusions from previous messages)
_______________________________________________
On Thu, Feb 18, 2016 at 06:24:15PM +0000, R P wrote:
I have setup My Cisco to do Tunnel to
132.239.255.131
That is the wrong address. The UCSD tunnel is at 169.228.66.251.
- Brian
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net