28 Jan
2023
28 Jan
'23
4:41 a.m.
Do you have the correct url? The Wiki can be found here: https://wiki.ampr.org
<https://wiki.ampr.org/>
Looks ok from here
73,
Chris - G1FEF
On 28 Jan 2023, at 00:56, lleachii--- via 44net
<44net(a)mailman.ampr.org> wrote:
I've inquired here a few times. I went to check the wiki as I beleive someone made
the requisite files to build and submit (I think I added the info); but the Wiki seems
down, and there a grant submission page in its place.
- Lynwood
-------- Original message --------
From: Matt Peterson via 44net <44net(a)mailman.ampr.org>
Date: 1/27/23 19:45 (GMT-05:00)
To: lleachii(a)aol.com
Cc: Harold via 44net <44net(a)mailman.ampr.org>
Subject: [44net] Re: ampr-ripd 2.4.1 / openwrt
Lynwood,
Has there ever been an effort to get a pre-compiled package(s) into OpenWRT?
--Matt
On Fri, Jan 27, 2023 at 3:17 AM lleachii--- via 44net <44net(a)mailman.ampr.org
<mailto:44net@mailman.ampr.org>> wrote:
Harold,
At https://downloads.openwrt.com <https://downloads.openwrt.com/> - on the same
page that you find the image for your router.
At the bottom of the page, there's a download for your relevant Software Development
Kit (SDK). Everything is included in the SDK.
The SDKs are made to work on Linux x86_64. The only method is to cross compile. The
OpenWrt Wiki has a cross-compile page. All linked on the AMPR Wiki page.
73,
Lynwood
KB3VWG
-------- Original message --------
From: Harold via 44net <44net(a)mailman.ampr.org
<mailto:44net@mailman.ampr.org>>
Date: 1/27/23 02:37 (GMT-05:00)
To: 44net(a)mailman.ampr.org <mailto:44net@mailman.ampr.org>
Subject: [44net] ampr-ripd 2.4.1 / openwrt
Ok I know there are A LOT of post from the PAST about compiling ampr-ripd for OpenWRT but
for the last few days, I have been racking my brain trying
to get this thing to compile for the router that I would like to use for my gateway but I
think I broke my brain....
I know Lynwood has done some extensive posting on this but things are just not working
out for me. Many different errors when trying different processes.
So, I would like to ask...
1st, for those that are cross-compiling, what development environment are you using such
as, linux version, the dependencies needed for that environment to work, and what version
of ampr-ripd are we cross-compiling for use in OpenWRT?
I would like to build the setup as someone who is successful with these processes.
Once that is done, Ill move on to the next step and try my hand at compiling ampr-ripd
again for my target device.
Baby steps.
Thanks for any direction with this...
Harold
K7ILO
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org <mailto:44net@mailman.ampr.org>
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
<mailto:44net-leave@mailman.ampr.org>
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org <mailto:44net@mailman.ampr.org>
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org
<mailto:44net-leave@mailman.ampr.org>
_______________________________________________
44net mailing list -- 44net(a)mailman.ampr.org
To unsubscribe send an email to 44net-leave(a)mailman.ampr.org