17 Sep
2019
17 Sep
'19
12:14 p.m.
after setting up tunnels as following, when I try to run find_pass, I still stuck at
waiting for RIPv2 broadcast and never got the password.
Kun
________________________________
From: 44Net <44net-bounces+dnwk=linkun.info(a)mailman.ampr.org> on behalf of KUN LIN
via 44Net <44net(a)mailman.ampr.org>
Sent: Monday, September 16, 2019 8:56:32 PM
To: Scott Nicholas <scott.nicholas(a)scottn.us>
Cc: KUN LIN <dnwk(a)linkun.info>fo>; AMPRNet working group
<44net(a)mailman.ampr.org>
Subject: Re: [44net] need help configure gateway on ubuntu
My allocation is 44.26.1.148/30
So does it mean I need to do
auto ampr0
iface ampr0 inet static
address 44.26.1.150
netmask 255.255.255.252
metric 100
pre-up ip tun add ampr0 mode ipip ttl 64 local {my public IP} dev ens3
up ip route add default via 169.228.34.84 dev ampr0 onlink table default
up ip rule add from 44.26.1.150 table default
up ampr-ripd -s -t default -i ampr0 -m 90 -a 44.26.1.148/30
up ping -c 1 -I ampr0 44.0.0.1 > /dev/null 2>&1
pre-down ip route del default via 169.228.34.84 dev ampr0 onlink table default
post-down killall ampr-ripd
post-down ip rule del from 44.26.1.150 table default
post-down ip tunnel del ampr0
post-down rmmod ipip
Thanks
Kun
From: Scott Nicholas <scott.nicholas(a)scottn.us>
Sent: Monday, September 16, 2019 8:31 PM
To: KUN LIN <dnwk(a)linkun.info>
Cc: AMPRNet working group <44net(a)mailman.ampr.org>
Subject: Re: [44net] need help configure gateway on ubuntu
Yes, that's it. Replace 44.128.0.1. And 149.28.12.190 replace with your current ip on
the internet. 169.228.34.84 stays as-is.
On Mon, Sep 16, 2019, 11:26 PM KUN LIN
<dnwk@linkun.info<mailto:dnwk@linkun.info>> wrote:
You mean this example? Do I need to replace 44.128.0.1 with my allocation?
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmailman.a…