Hi Marius,
I did indeed get the allocation about a month ago and also got a response from the gw
robot earlier today,
I currently have single /29 range but will be advertising other ranges once this works
(advertising routes for friends)
I have a static public I can build this on which is on my current connection (later I can
migrate it to another one of my statics as I own my own AS and /24 PI space from RIPE
I can access the 44net from another ip space if needed while im testing I also have access
to multiple other routers within UK via VPN ect
I intend on being the GW for this region (norfolk) due to my skills and ability to host
this on a 1GB line I have on a remote site within Norfolk
I just need to know now what needs to be setup on my router which can then send out the
RIP advertisement to the Internet and announce the Subnets that
Im using MikroTik hardware which is based on the same logic and routabilities as Cisco
hardware
Cheers,
Kevin
2E0LSR /P
Sent from Somewhere Rural with limited Cell Coverage!
Try HF or VHF/UHF better chances!
<div>-------- Original message --------</div><div>From: Marius Petrescu
<marius(a)yo2loj.ro> </div><div>Date:26/03/2015 17:46 (GMT+00:00)
</div><div>To: 'AMPRNet working group'
<44net(a)hamradio.ucsd.edu> </div><div>Subject: Re: [44net] Gateways
</div><div>
</div>(Please trim inclusions from previous messages)
_______________________________________________
Greetings Kevin,
To figure this out, I need a little more info on your setup.
- did you get your GW in the end - btw, your country admin needs to approve
your allocation, maybe there's the issue?
- do you have a single subnet (which can be expressed in a single IP/mask
combination) ?
- do you have a static IP address to build your GW upon ?
- do you have some other means to connect to the 44 address space (e.g.
hamnet - high speed wlan)?
- do you need to set up a complex network with more than 1 GW and direct
connections between them ?
Marius, YO2LOJ
-----Original Message-----
From: 44net-bounces+marius=yo2loj.ro(a)hamradio.ucsd.edu
[mailto:44net-bounces+marius=yo2loj.ro@hamradio.ucsd.edu] On Behalf Of Kevin
Sent: Thursday, March 26, 2015 16:23
To: 44net(a)hamradio.ucsd.edu
Subject: [44net] Gateways
(Please trim inclusions from previous messages)
_______________________________________________
Afternoon All,
Ive not gotten a GW entry into the system, after a long time waiting for the
Robot to reply to my message,
Next thing now is what next??
There is no documentation as to what the next step is now I¹ve added this gw
to the portal and my announced subnetsÐ
On the actual physical GW what do I need to do for it to be announced??
Thanks,
Regards,
Kevin
2E0LSR (M6EMT) / MS0SIA
Consultant Wireless & Networking Engineer
MTCNA, MTCRE, MTCINE, UCWA, UEWA, CompTIA A+