Re: [44net] GW Setup Problem

When I check port 520 availabilty with NETSTAT the following is the result # netstat -anp | grep 520 udp 0 0 0.0.0.0:520 0.0.0.0:* 6032/./ampr-ripd Baris (TA7W) ----- Original Message ----- From: "Barış DİNÇ" &lt;ta7w(a)antrak.org.tr&gt; To: "44Net" &lt;44net(a)mailman.ampr.org&gt; Sent: Wednesday, December 13, 2017 2:35:38 PM Subject: Re: [44net] GW Setup Problem Hi Tom, Thanks for quick reply. I am using ampr-ripd daemon which enables the UDP 520.. I can check its existency by command nc -u <MY_IP> 520 Should I do something else... I am not hehind a firewall or any iother network equipment. My gateway is directly connected to INTERNET. My server has a real IP and all ports are open.... Thanks baris TA7W ----- Original Message ----- From: SP2L(a)wp.pl To: "44Net" &lt;44net(a)mailman.ampr.org&gt; Sent: Wednesday, December 13, 2017 12:49:42 PM Subject: Re: [44net] GW Setup Problem Hello Baris. You need to enable udp port 520 for incoming packets. Best regards. Tom - SP2L _________________________________________ 44Net mailing list 44Net(a)mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net _________________________________________ 44Net mailing list 44Net(a)mailman.ampr.org https://mailman.ampr.org/mailman/listinfo/44net