Re: [44net] New set up and everything

Is anyone out there able to assist me with getting my own hamradio TCP/IP setup implemented. I am a newbie. Arnold Villeneuve 613-833-0984 Change is the end result of all true learning.- Leo Buscaglia -----Original Message----- From: 44Net [mailto:44net-bounces+arnold.villeneuve=rogers.com@hamradio.ucsd.edu] On Behalf Of James Sharp Sent: May-07-16 5:16 PM To: AMPRNet working group Subject: [44net] New set up and everything (Please trim inclusions from previous messages) _______________________________________________ Hi all, I've had a /29 allocation for a while but I'm just now getting set up to try to get it working and I have a questions. My edge router is a Cisco 1811 that I've configured a single IP-IP tunnel on. interface Tunnel44 no ip address ip tcp adjust-mss 1436 tunnel source FastEthernet0 tunnel mode ipip tunnel destination 169.228.66.251 end The only traffic I see coming in on that interface is multicast (which I see as being from RIPng). Are hosts on AMPR net reachable from the public internet via the UCD gateway or is the only traffic I'll ever see from there those RIPng packets? And from what I'm guessing, packets sent to the UCD gateway don't get routed to other netblocks/allocations so I'd need to goahead and build tunnels to everyone else to get a full mesh network. Can someone give me a suggestion on netblocks to build to just to test things? Thanks, James Sharp N5XNS james(a)fivecats.org _________________________________________ 44Net mailing list 44Net(a)hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net