6 Jun
2017
6 Jun
'17
12:43 p.m.
Well, I'm wondering if the UCSD tunnel IP address was changed?
SP2GCH
2017-06-06 14:41 GMT+02:00 Jacek Grzona <sp2gch(a)gmail.com>om>:
> 44.0.0.1 & 44.0.0.2 I do not have in the routing table. If I get an error
> in the script right away in the routing table I am reducing the IP list. If
> it is possible then please be very careful about the filters. I have the
> following entries in the Routing-> prefix lists tab:
> "Chain ampr, prefix 44.0.0.1, prefix length 32 discard
> Chain ampr, prefix 44.0.0.0/8, prefix length 8-32 accept
> Chain ampr, prefix 0.0.0.0/0, prefix length 0-32 discard "
>
> SP2GCH
>
> 2017-06-06 14:17 GMT+02:00 Ruben ON3RVH <on3rvh(a)on3rvh.be>be>:
>
>> Jacek,
>>
>> Check your routing table. There probably is a route to 44.0.0.1 &
>> 44.0.0.2 in your routing table pointing towards IPIP interfaces. Delete
>> those routes and interfaces and insert 44.0.0.1 & 44.0.0.2 in the filters
>> for RIP with action reject or ignore.
>> That should fix everything and your RIP table will be populated again
>> after 5 min orso and you should be golden.
>>
>> If you need the exact commands for the RIP filters, let me know and I'll
>> forward them once I get home tonight.
>>
>> Ruben - ON3RVH
>>
>> > On 6 Jun 2017, at 14:08, Jacek Grzona <sp2gch(a)gmail.com> wrote:
>> >
>> > Hello. Is there any probel for a few days with yo2loj script? For a few
>> > days I receive such a return in the logs of the mikrotik
>> > "Jun / 06/2017 13:21:00 script, error AMPR: To few RIP entries
>> available"
>> > Regards
>> > SP2GCH
>> >