16 Nov
2019
16 Nov
'19
5:27 a.m.
For the RIP listener to work, the IP address of the ucsgw interface
needs to be 44.x.y.z/8 (not 32) with network 44.0.0.0
On 15.11.2019 23:09, Thomas Glaab via 44Net wrote:
That guide worked for establishing the tunnel, but I
don't seem to get
working RIP packets.
The IP address for my local port is 44.x.y.1/32 with a network of 44.x.y.0
(/24). But the IP address on the tunnel interface is 44.x.y.2/32 with a
network of 44.0.0.0 (/8). Somehow this works and the tunnel connects.
Every five minutes I see some packets come in and a packet capture shows
the clear text password in them. But the RIP listener isn't seeing them. I
even set the RIP to listen for any advertisement (not just 44.0.0.0) on any
interface.
tg.
AJ4UQ.
On Fri, Nov 15, 2019 at 2:28 PM Paul Greeff via 44Net <
44net(a)mailman.ampr.org> wrote:
Hi OM
I'm hoping to pick someone's brain with regards to the IPIP and RIP config
for AMPRnet on my Mikrotik at home.
I'm using the guide http://www.yo2loj.ro/hamprojects/ampr-gw-README.txt,
which indicates after step seven and a few minutes of waiting I should see
my routing table populated with routes with a 44rip routing mark. Nope.
I've monitored for port 520 on the IPIP as well as Internet facing
interface and see no activity. I also haven't seen a single packet on the
ucsd-gw interface (not sure if I should at this time). So I'm obviously
missing something important and perhaps fundamental in this configuration.
Please send some of your wisdom my way.
Regards
Paul (ZS6IO)
--
Paul Greeff
email(a)paulgreeff.com
Office: +27 86 100 3117
Cell: +27 83 954 3453
Fax:
086 659 0511
Winlink:
zs6io(a)winlink.org
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net