25 Oct
2013
25 Oct
'13
1:28 p.m.
What speed were you running across the Xbee? I've found with AX25/JNOS that
at 1200bd it takes about 3 seconds to do a ping across the bench. If you
have to add an ARP to that then things go south real fast.
Mark
On Fri, Oct 25, 2013 at 12:03 PM, Bill Hill <rtufty(a)gmail.com> wrote:
(Please trim inclusions from previous messages)
_______________________________________________
Hi, I had an Xbee in a RaspberryPi talking to another one in a linux
laptop,
using SLIP on the USBserial/Xbee converters. Trying to ping through I
found that a ping every 5seconds worked fine, but more frequently than that
and the reply time just kept climbing until the connection errored out.
Haven't yet dug in to figure out what was going on.
Bill
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
http://www.ampr.org/donate.html