8 Jan
2023
8 Jan
'23
2:37 p.m.
Copy that. I went ahead and got one setup and it actually works, all
devices are making use of the 44net IPs and they all have direct internet
access for inbound and outbound traffic, but I ran into a problem... The
second I issue the "ufw enable" commend to bring up my firewall, everything
stops working, no more traffic flowing in either direction. What can I do
to fix this? I'm not great at Linux networking, I'm still learning it.
On Sun, Jan 8, 2023, 6:27 AM Dan Cross <crossd(a)gmail.com> wrote:
On Sun, Jan 8, 2023 at 4:14 AM kj7omo--- via 44net
<44net(a)mailman.ampr.org> wrote:
Hey y'all! I wanna set up a DHCP server on my
gateway to hand my
44.x.x.x IPs to my various ham radio devices and provide them
with internet
access, as well as direct access to the outside world, allowing them to be
accessed remotely via the 44.x.x.x IPs, is this possible?
I don't see why you can't use a DHCP server locally, but there's a
caveat in that, for the gateway at 44.0.0.1 to pass traffic, your
addresses must have A (name) records in the ampr.org DNS domain. This
implies that the addresses handed out by DHCP are going to be
relatively static (unless, I guess, you register a bunch of names in
DNS in advance).
BUT, if all you want is a central place to configure address
information, then most DHCP servers can be configured to hand out
static addresses to specific devices identified by MAC addresses.
- Dan C. (KZ2X)