3 Aug
2015
3 Aug
'15
3:01 a.m.
The files and README are located here for those on
AMPRNet:
http://44.60.44.10/amprnet_docs/start_ampr_version2
No link from here to your address... but this fault remain the same,
as normal, for several other sites i.e. N1URO, etc.
Setup here is the standard IPIP tunnel (tunl0) on 44.134.32.240
IP address and ampr-ripd v 1.13 with any kinda filters used.
As per other previous messages:
I can confirm to Brian Kantor the very good setup of RIP2 service
at ucsd.edu server for the *RIP time/rate broadcast* and for the
very *short reaction* on portal.ampr.org when a dynamic IP
address change occurs. Very TNX.
73, gus i0ojj