5 Aug
2013
5 Aug
'13
4:29 p.m.
Hi Tom,
Thanks for quick reply. I have opened UDP port 520 in NAT to point to
my GATEWAY's ethernet port, but is this necessary when I have already
put my GATEWAY's ethernet port IP to DMZ?
Also do I need to open port 520 UDP, TCP or both?
Any ideas please?
73 de SV1UY
On Mon, Aug 5, 2013 at 12:21 PM, <sp2lob(a)tlen.pl> wrote:
(Please trim inclusions from previous messages)
_______________________________________________
Hello Demetre,
First, you need to open port 520.
Then try to put your local machine into DMZ zone,
as it HAS TO BE SEEN by amprgw server...
I did it, and it worked for me.
Best regards.
Tom - sp2lob
_________________________________________
44Net mailing list
44Net(a)hamradio.ucsd.edu
http://hamradio.ucsd.edu/mailman/listinfo/44net
http://www.ampr.org/donate.html
--
73 de SV1UY
Demetre Ch. Valaris
IP Coordinator for AMPRnet in Greece
e-mail: demetre.sv1uy(a)gmail.com
Radio e-mail: sv1uy(a)winlink.org
(to use my radio e-mail put //WL2K in the beginning of the subject line)
http://www.qsl.net/sv1uy