Re: [44net] Linux Gateway Tutorial

(Please trim inclusions from previous messages) _______________________________________________ Hi Neil, To add, for compiling ampr-ripd, one needs gcc, make and libc6-dev packets installed , unpack the archive content to a folder and issue a 'make install'. That's it. 73s de Marius, YO2LOJ -----Original Message----- From: 44net-bounces+marius=yo2loj.ro(a)hamradio.ucsd.edu [mailto:44net-bounces+marius=yo2loj.ro@hamradio.ucsd.edu] On Behalf Of Neil Johnson Sent: Monday, March 24, 2014 05:06 To: AMPRNet working group Subject: [44net] Linux Gateway Tutorial (Please trim inclusions from previous messages) _______________________________________________ I'm trying to decide how to write a "How To" guide for setting up a Linux Gateway for the Wiki. I'm planning on basing it on the excellent guide found here (with Credit): http://marc.storck.lu/blog/2013/08/howto-setup-an-amprnet-gateway-on-linux/ But I'm wondering what level of Linux Administration and IP Networking Expertise I should assume. If I assume zero, it's going to be a looong guide, probably too long. Below is a link to the diagram I was planning to base the guide off of. AMPRNet Gateway Diagram - https://docs.google.com/drawings/d/1xAcMbROBpbuRFY0tVf1VdBrAP0ZQwTsE6Eqokn2E MZo/edit?usp=sharing Comments welcome. Thanks -Neil _________________________________________ 44Net mailing list 44Net(a)hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net _________________________________________ 44Net mailing list 44Net(a)hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net