16 Nov
2019
16 Nov
'19
1:24 a.m.
Thanks Marius and everyone else.
RIP updates eventually did come through. However, I greatly overestimated
the capabilities of my little HAPlite and promptly killed it. It got up to
700 odd routes and fell over at around 500 ipip interfaces. I will need to
upgrade to something a little more beefy.
Regards
Paul
On Sat, Nov 16, 2019 at 3:56 AM ai6bx.keith <ai6bx.keith(a)verizon.net> wrote:
I am having essentially the same issue and looking for
guidance myself.
Keith Ai6bx
Sent from my iPad
--
Paul Greeff
email(a)paulgreeff.com
Office: +27 86 100 3117
Cell: +27 83 954 3453
Fax:
086 659 0511
Winlink:
zs6io(a)winlink.org
On Nov 15, 2019, at 11:27 AM, Paul Greeff via
44Net <
44net(a)mailman.ampr.org> wrote:
Hi OM
I'm hoping to pick someone's brain with regards to the IPIP and RIP
config
for AMPRnet on my Mikrotik at home.
I'm using the guide http://www.yo2loj.ro/hamprojects/ampr-gw-README.txt,
which indicates after step seven and a few minutes of waiting I should
see
my routing table populated with routes with a
44rip routing mark. Nope.
I've monitored for port 520 on the IPIP as well as Internet facing
interface and see no activity. I also haven't seen a single packet on the
ucsd-gw interface (not sure if I should at this time). So I'm obviously
missing something important and perhaps fundamental in this
configuration.
Please send some of your wisdom my way.
Regards
Paul (ZS6IO)
--
Paul Greeff
email(a)paulgreeff.com
Office: +27 86 100 3117
Cell: +27 83 954 3453
Fax:
086 659 0511
Winlink:
zs6io(a)winlink.org
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net