15 Feb
2019
15 Feb
'19
1:40 p.m.
Awesome,, but I’m out of pocket until Monday evening.
I have a basic ER setup installed in the DMZ of my pfSense which in the past NATed my ipip
traffic. I have not yet created the ipip tunnel to UCSD but will do so on Monday evening
or Tuesday.
I’m looking forward to this project.
— tom
Tom Cardinal / MSgt USAF (Ret) / N2XU / BSCS / CASP+
On Feb 14, 2019, at 11:30 AM, Marius Petrescu
<marius(a)yo2loj.ro> wrote:
The build environment to be used on the router itself can be set up like this....
https://www.ntop.org/nprobe/running-nprobe-and-ntopng-on-ubiquity-edgeroute…
On 14.02.2019 19:27, Marius Petrescu wrote:
Excellent.
The processor on the Edgerouter light is a MIPS, and cross compile tools are available.
There is also an option to install 3rd party add ons.
I will dig into this a little, but unfortunately I can not test since I don't have a
Edgerouter.
Maybe someone has more experience with this machines...
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net On 14.02.2019 00:08, Tom Cardinal via 44Net
wrote:
I’m willing to work to get the mesh portion of it working. I am fine with flashing
software but I do not know much about the software platform it sits on. I’ve only been in
the command line a few times.
I’ll follow the wiki guide to get it online and contact you when I have it going.
— tom
Tom Cardinal / MSgt USAF (Ret) / N2XU / BSCS / CASP+
_________________________________________
44Net mailing list
44Net(a)mailman.ampr.org
https://mailman.ampr.org/mailman/listinfo/44net