44net October 2013

44net@mailman.ampr.org

38 participants
33 discussions

44.133.48.66 !!!
by Maiko Langelaar 12 Apr '14

12 Apr '14

Good afternoon, It would see that 44.133.48.66 is popping, snmpding, and other amounts of traffic from time to time to various ampr.org systems and doing so *without warning* type of thing. I just got hit with a bunch of SNMP requests, others have been hit with POP requests. Can anyone find out who the owner of that particular system or network is, so that I can contact the entity or person. Or perhaps a bit more draconian, can someone deal with it. Thanks in advance. Maiko Langelaar VE4KLM

4 5

ON7LR Contest Cam
by Robbie De Lise 01 Nov '13

01 Nov '13

Dr. Om's, We will be running a camserver on http://44.144.10.45/ this weekend for the CQ.WW contest, with camera's in all the shacks of the ON7LR contest station http://www.on7lr.org/ in Lier Belgium The cam server is located at the contest station, where the shacks are connected with a mixture of network cabling and 5ghz wifi links. The contest station itself is linked via a 5ghz wifi link to another node in Antwerp, 20km away, which in turn is linked over 5ghz to the Antwerp Datacenter. Here we link to the fiberbackbone of a commercial ISP and have an ipip tunnel to HamNet in Germany for AMPR connectivity. We also announce this 44 subnet to the internet, so its possible to view these cams over the public internet, even if you are not connected to AMPRnet. I just wanted to share since this is the first time we are doing this over AMPRnet :) 73s Robbie ON4SAX

3 4

SJVBBS W6RAY
by Ray Quinn 28 Oct '13

28 Oct '13

This is a quick message to my forwarding partners that on Sunday, October 27, 2013, the SJVBBS (W6RAY) BBS will be offline for a short time. The BBS will be moved to a Raspberry Pi with two TNC-Pis connected to it. This setup will be located entirely at the repeater site (Park Ridge) instead of via remote. The gateway IP address will remain the same as will the AMPR IP addresses. The setup is currently in testing using a different alias and SSIDs at ground level. If the test is successful, then it will be installed at the repeater site. -- --- 73 de Ray Quinn W6RAY Visalia, CA DM06ih SJVBBS W6RAY 44.2.10.1

11 15

Re: [44net] 44Net Pi rackmount
by Rob Janssen 28 Oct '13

28 Oct '13

44net-request(a)hamradio.ucsd.edu wrote: > Subject: > Re: [44net] SJVBBS W6RAY > From: > <sp2lob(a)tlen.pl> > Date: > 10/28/2013 04:03 PM > > To: > "AMPRNet working group" <44net(a)hamradio.ucsd.edu> > > > Brian, > > It's designed to accomodate _two_ Pi's only. > > Best regards. > Tom - sp2lob I investigated this before and there does not seem to be a rack enclosure for a reasonable number (like 4 or 5). Probably the best bet is to get an old HUB or Switch, rip out all the electronics except the power supply, and cut holes to fit the desired number. There are also larger-scale custom made solutions, e.g. here: http://blog.raspberrycolocatie.nl/raspberry-pi-colocation/ I have a colocated Pi there. Rob

1 0

advertised services
by kb9mwr＠gmail.com 28 Oct '13

28 Oct '13

I stumbled into a useful function that the Hamnet/HSMM folks have: http://hsmm-mesh.org/hsmm-mesh-forums/view-postlist/forum-1-general/topic-5… Maybe there is a way to do (code) something similar for the more traditional nodes on the amprnet. Advertising what is out there on a network seems to be a major issue at least in my eyes.

3 3

Galileo
by Brian Rogers 28 Oct '13

28 Oct '13

Has anyone seen one of these yet? http://www.mouser.com/new/Intel/intel-galileo-development-board/?utm_source… Looks like Intel is going after the Pi market with a processor that's half the speed of the Arm in PIs. -- 73 de Brian Rogers - N1URO email: <n1uro(a)n1uro.ampr.org> Web: http://www.n1uro.net/ Ampr1: http://n1uro.ampr.org/ Ampr2: http://nos.n1uro.ampr.org Linux Amateur Radio Services axMail-Fax & URONode AmprNet coordinator for: Connecticut, Delaware, Maine, Maryland, Massachusetts, New Hampshire, Pennsylvania, Rhode Island, and Vermont.

1 0

Raspberry Pi vs. Beagleboard
by Geoff Joy 28 Oct '13

28 Oct '13

Looking into networking some XBee Pro 900 Zigbee modules into a mesh network on 902-928 MHz. I have the Digi development package and it looks like I will need to either invent a TCP/IP stack for PC thru USB to the Digi XBIB or else host the S3B radio on Raspberry Pi or Beagleboards. What are the groups thoughts on pros/cons on each?

5 9

VE2PKT is back
by Jean Létourneau 25 Oct '13

25 Oct '13

Please if you need, update your ENCAP.TXT, as of this morning, ve2pkt.ampr.org in back using a new gateway address. Thank you. 73 de Jean -- Sysop de: VE2PKT (BBS), VE2PKT-3 (X-NET),VE2PKT-4, VE2RAJ (XRouter) : VE2RCN-1, VE2RDL-1, VE2RGC-1, VE2RVA-1, (The-Net) : VE2PKT-9 (DXCluster), VE2PKT-10 (Winlink Gateway) RF: 147.435 Mhz (1200 Bps) Internet: Telnet xrouter-ve2pkt.dyndns.org port 23 (Network Node) Telnet fbb-ve2pkt.dyndns.org port 6300 (FBB BBS) Telnet ve2pkt.dyndns.org port 9000 (DXCluster) E-Mail: packet: ve2pkt(a)ve2pkt.#qbc.qc.can.noam ampr net: va2om(a)ve2pkt.ampr.org <ve2pkt(a)ve2pkt.ampr.org> Inet: ve2pkt(a)amsat.org or ve2pkt(a)gmail.com

3 2

Re: [44net] Raspberry Pi
by Assi Friedman 23 Oct '13

23 Oct '13

I am not sure that overclocking is relevant to NAND flash. The issue is quality control for the device. NAND cells are simple and the process drives reliability significantly. Vendors pay per quality, which translates to a number of cycles the device will endure. Well known brands demand and get better dies. Overclocking NAND will result in timing violations that will lead to failed commands - but it will not damage the die. This is different from the traditional overclocking to death of CPUs. The order of magnitude of power makes a significant difference. Assi -----Original Message----- From: 44net-bounces+assi=kiloxray.com(a)hamradio.ucsd.edu [mailto:44net-bounces+assi=kiloxray.com@hamradio.ucsd.edu] On Behalf Of Jerry Sent: Tuesday, October 22, 2013 4:11 PM To: 'AMPRNet working group' Subject: Re: [44net] Raspberry Pi (Please trim inclusions from previous messages) _______________________________________________ Hi Demetre. Have you studied the Compatibility list... Some are shown to be a bad choice.. Some Kingston are listed as such. My first two SD cards I got from Fry's Electronics and they were I think, PNY brands. PNY I have found even their USB Sticks are junk.. But the two I got were only $4 ea.. Bad choice for the Pi. One lasted a few weeks the other until I had a sudden power outage about 6 weeks into it. I now have 2 Kingston SDXC Card 128GB Class 10 SDX10V/128GB Running on TWO pi.. Or Pi Squared.. lol One is under heavy abuse.. I have tried experimenting with sudden power outages, and constant read writes on one unit... And it has not suffered any issues.. In Fact I even tried it from -20F to +140F for S&G's They are NOT OVERCLOCKED. The other runs w9hu BBS Linbpq.. What do you use to image the SD card I used to use Windows program WinDisk32 .. I think this is the biggest issue with the Pi SD Cards.. At least I have had no issues with mine since I stopped that practice. Also what are you using that requires an external HUB.. You can also connect a TNC (other serial devices) to the GPiO port instead of the USB. Have you tried a PiTNC yet? Makes good topping.. :) it is the same size and sits atop the Pi. Like Icing!! 73 Jerry N9LYA PS I ll try to get back one the conv server as time permits.. _________________________________________ 44Net mailing list 44Net(a)hamradio.ucsd.edu http://hamradio.ucsd.edu/mailman/listinfo/44net http://www.ampr.org/donate.html

3 2

Re: [44net] Raspberry Pi
by Jerry Kutche 22 Oct '13

22 Oct '13

I have been running a test pi 128gb SD .running for 3 months. No issues with constant abuse... My linbpq pi been running same sd for 6... -----Original Message----- From: "Demetre SV1UY" <demetre.sv1uy(a)gmail.com> Sent: ‎10/‎22/‎2013 5:40 PM To: "AMPRNet working group" <44net(a)hamradio.ucsd.edu> Subject: Re: [44net] Raspberry Pi (Please trim inclusions from previous messages) _______________________________________________ Hi all, If we are to use an external harddrive and an external USB Hub, why not get a mini-ITX MBO powered with 12V and a small mini-ITX box? This way we can have a decent CPU which is also low power in electricity not low in computing power (about 30 watts total). I think the RPi is only good in portable apps, but then again the SD Card is a major handicap. It could be good for applications that are not 24/7/365, such as an event where an AMPRnet GATEWAY is desired only for a few hours or maybe a few days max. If you operate the SD Card for more than a few days, it might get destroyed from the constant write of log files, updating databases etc. Can we have a system with no writting on the disk all the time? I'm not sure. 73 de Demetre SV1UY On Wed, Oct 23, 2013 at 12:26 AM, K7VE - John <k7ve(a)k7ve.org> wrote: > (Please trim inclusions from previous messages) > _______________________________________________ > Yes, the Pi boots from the SD, but one can put files on an attached drive, > especially swap, database, and logs. With a little configuration one could > probably put everything except the boot configuration on an external drive > and never write to the SD. > > > ------------------------------ > John D. Hays > K7VE > PO Box 1223, Edmonds, WA 98020-1223 > <http://k7ve.org/blog> <http://twitter.com/#!/john_hays> > <http://www.facebook.com/john.d.hays> > > > On Tue, Oct 22, 2013 at 12:05 PM, <sp2lob(a)tlen.pl> wrote: > >> (Please trim inclusions from previous messages) >> ______________________________**_________________ >> SD card is the _must_ for Pi to boot... >> To my knowledge - there is no other choice. >> >> Best regards. >> Tom - sp2lob >> >> ______________________________**___________ >> 44Net mailing list >> 44Net(a)hamradio.ucsd.edu >> http://hamradio.ucsd.edu/**mailman/listinfo/44net<http://hamradio.ucsd.edu/mailman/listinfo/44net> >> http://www.ampr.org/donate.**html <http://www.ampr.org/donate.html> >> >

3 2

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

44net October 2013